Read Sharp AR-P11 (serv.man3) Service Manual online
AR-P11 SETTING AND ADJUSTMENTS / SIMULATION - 2
B. Configuration menu
The following items may be set with the menus of the operation panel.
Values in bold letters are factory default settings. Values that you set
are preserved even if the printer is turned off. Note that the functions
with the settings "On" and "Off" are set by pressing the OK key so that
a check mark is displayed in the check box.
Values in bold letters are factory default settings. Values that you set
are preserved even if the printer is turned off. Note that the functions
with the settings "On" and "Off" are set by pressing the OK key so that
a check mark is displayed in the check box.
(1) Main menu
PCL symbol set
Item
Possible settings
Description
COPIES
1 - 999
Sets how many copies to
print.
print.
RESOLUTION
1200DPI / 600DPI /
300DPI
300DPI
Sets the printing resolution.
SMOOTHING
On / Off
Sets whether smoothing is
done or not. This function
improves the appearance of
printed documents by
smoothing the angles and
curves of images. This
allows printing at a higher
apparent resolution. For
example, if the printer is set
to 600dpi, resolution
equivalent to 1200dpi can
be achieved. When printing
bit- mapped images, you
may need to select "Off" to
achieve best results.
done or not. This function
improves the appearance of
printed documents by
smoothing the angles and
curves of images. This
allows printing at a higher
apparent resolution. For
example, if the printer is set
to 600dpi, resolution
equivalent to 1200dpi can
be achieved. When printing
bit- mapped images, you
may need to select "Off" to
achieve best results.
TONER SAVE
On / Off
Sets whether toner save
mode is in effect or not.
This function prints slightly
fainter to save toner. This
item is different from the
copier "toner save mode".
mode is in effect or not.
This function prints slightly
fainter to save toner. This
item is different from the
copier "toner save mode".
PAGE
PROTECTION
PROTECTION
On / Off
Sets page protection. Page
protection is a function
designed to prevent data
loss errors when complex
data is printed.
protection is a function
designed to prevent data
loss errors when complex
data is printed.
ROPM
On / Off
Sets whether the ROPM
function is enabled. If the
ROPM function is enabled,
print data will be stored in
the printer memory once for
printing onto multiple
sheets. This function can
reduce transmission
quantity between the printer
and your computer.
function is enabled. If the
ROPM function is enabled,
print data will be stored in
the printer memory once for
printing onto multiple
sheets. This function can
reduce transmission
quantity between the printer
and your computer.
2- SIDED
PRINTING
PRINTING
OFF / BOOK /
TABLET
TABLET
Select "Book" to print on
both sides of the paper and
to bind the left margin.
Select "Tablet" to print on
both sides of the paper and
to bind the top margin.
both sides of the paper and
to bind the left margin.
Select "Tablet" to print on
both sides of the paper and
to bind the top margin.
PAPER
SOURCE
SOURCE
AUTO / TRAY1 /
TRAY2 / TRAY3 * /
TRAY4 * / BYPASS
TRAY (MANUAL) /
BYPASS TRAY
(AUTO)
TRAY2 / TRAY3 * /
TRAY4 * / BYPASS
TRAY (MANUAL) /
BYPASS TRAY
(AUTO)
Sets the tray used for paper
feeding. Setting to "AUTO"
automatically selects the
paper tray loaded with the
paper of the size specified
in the "PAPER SIZE" item. *
The available settings
reflect the installed trays.
feeding. Setting to "AUTO"
automatically selects the
paper tray loaded with the
paper of the size specified
in the "PAPER SIZE" item. *
The available settings
reflect the installed trays.
PAPER SIZE
A3 / B4 / A4 * / B5 /
A5 / B6 / A6 /
11 x 17 / 8- 1/2 x 14
/ 8-1/2 x11 * /
8-1/2 x 13 / 8. 3 x 13
/ 7-1/ 4 x 10-1/2 /
5-1/2 x 8-1/2 / 8K /
16K / COM10 / DL /
C5
A5 / B6 / A6 /
11 x 17 / 8- 1/2 x 14
/ 8-1/2 x11 * /
8-1/2 x 13 / 8. 3 x 13
/ 7-1/ 4 x 10-1/2 /
5-1/2 x 8-1/2 / 8K /
16K / COM10 / DL /
C5
Sets the size of the paper
where data will be printed. If
this size is different from the
paper size present in the
tray, the size set for this item
takes precedence. *
Depending on where the
printer was purchased, the
default value is either "A4"
or "Letter".
where data will be printed. If
this size is different from the
paper size present in the
tray, the size set for this item
takes precedence. *
Depending on where the
printer was purchased, the
default value is either "A4"
or "Letter".
ORIENTATION
PORTRAIT /
LANDSCAPE
LANDSCAPE
Sets the page orientation
for printing. Specify
"PORTRAIT" to print the
paper with its long side
(longer edge) vertical.
Specify "LANDSCAPE" to
print the paper with its long
side (longer edge)
horizontal.
for printing. Specify
"PORTRAIT" to print the
paper with its long side
(longer edge) vertical.
Specify "LANDSCAPE" to
print the paper with its long
side (longer edge)
horizontal.
EMULATION
AUTO / PCL / PS3 *
Specifies the printer
language used. * Displayed
only if the PS3 expansion
kit (AR- PK1)( optional for
some models) is installed. If
"AUTO" is selected, the
emulation to PCL5e, PCL6
or PS3 is automatically set
depending on the received
data.
language used. * Displayed
only if the PS3 expansion
kit (AR- PK1)( optional for
some models) is installed. If
"AUTO" is selected, the
emulation to PCL5e, PCL6
or PS3 is automatically set
depending on the received
data.
PCL SYMBOL
SET
SET
1 - 35
Specifies a PCL symbol set.
(The symbol set is used to
assign a part of character
codes to characters of a
country.) See the table on
the next page. The factory
default setting is 1 (Roman-
8).
(The symbol set is used to
assign a part of character
codes to characters of a
country.) See the table on
the next page. The factory
default setting is 1 (Roman-
8).
No.
Symbol set
No.
Symbol set
1
Roman- 8
19
Math-8
2
ISO 8859- 1 Latin 1
20
PS Math
3
PC- 8
21
Pi Font
4
PC- 8 Danish/ Norwegian
22
ISO 8859- 2 Latin 2
5
PC- 850
23
ISO 8859- 9 Latin 5
6
ISO 6 ASCII
24
ISO 8859- 10 Latin 6
7
Legal
25
PC- 852
8
ISO 21 German
26
PC- 775
9
ISO 17 Spanish
27
PC- Turkish
10
ISO 69 French
28
MC Text
11
ISO 15 Italian
29
Windows 3.1 Latin 1
12
ISO 60 Norwegian v1
30
Windows 3.1 Latin 2
13
ISO 4 United Kingdom
31
Windows 3.1 Latin 5
14
ISO 11 Swedish: names
32
Windows Baltic (not 3. 1)
15
PC- 1004 (OS/ 2)
33
Windows 3.0 Latin 1
16
DeskTop
34
Symbol
17
PS Text
35
Wingdings
18
Microsoft Publishing
Item
Possible settings
Description
Click on the first or last page to see other AR-P11 (serv.man3) service manuals if exist.