Read Sharp AR-NC3D (serv.man2) Handy Guide online
When the download is complete, FTP DL displays a “Writing update into Flash memory”
message. In addition, the message “Please wait at least 4 minutes” is displayed. The 4 minute wait
ensures that the NIC has sufficient time to fully write the updated firmware into Flash memory.
The NIC will then automatically reset and run the new firmware in Flash memory.
message. In addition, the message “Please wait at least 4 minutes” is displayed. The 4 minute wait
ensures that the NIC has sufficient time to fully write the updated firmware into Flash memory.
The NIC will then automatically reset and run the new firmware in Flash memory.
This user should acknowledge that the NIC has performed a reset by clicking the “OK” button.
The update procedure is now complete.
Step 4: Make sure that the new firmware was properly written to Flash
memory
memory
Procedure
1. Use a Web browser to access the HTML pages in the NIC.
2. Examine the firmware version number to ensure that it matches the firmware that was
downloaded into the NIC.
Click on the first or last page to see other AR-NC3D (serv.man2) service manuals if exist.