Read Sharp AR-NC3D (serv.man2) Handy Guide online
Step 2: Download the NIC Update program and execute
Procedure
FTP DL displays a “Downloading NIC Update Program (BIN) to NIC” message, starting with a
“Waiting To Connect” message. This wait occurs while the NIC switches into the “download to
RAM” mode. The wait is typically less than 30 seconds.
“Waiting To Connect” message. This wait occurs while the NIC switches into the “download to
RAM” mode. The wait is typically less than 30 seconds.
Once the connection is made and while the NUP is downloaded into RAM, FTP DL displays a
progress box showing percent of download complete.
progress box showing percent of download complete.
Note: While the NIC is being updated by FTP DL you should not attempt to access HTML
pages in the NIC, ping the NIC, or use Telnet to attempt to change the IP Address in the
NIC. This could interfere with the download process.
NIC. This could interfere with the download process.
Step 3: Download the Flash update file and write to Flash
Procedure
FTP DL displays an “Downloading Flash Update File (UPD) to NIC” message, starting with a
“Waiting To Connect” message. This wait occurs while the NIC resets and executes the NUP in
RAM.
“Waiting To Connect” message. This wait occurs while the NIC resets and executes the NUP in
RAM.
As the connection is made and the UPD file is downloaded, FTP DL displays a progress box
showing percent of download complete.
showing percent of download complete.
Click on the first or last page to see other AR-NC3D (serv.man2) service manuals if exist.