Read Sharp AR-NC1D (serv.man3) User Guide / Operation Manual online
NetWare Configuration-5
• Is off-line, jammed, opened, or out of paper
• Requires a manual paper feed or a form change
• Has had an engine failure
1. Choose Notify List for Printer on the Print Server Configuration menu.
2. Select the printer from the Defined Printers list. The screen appears (which is
blank for an initial installation). Press the RETURN key to view a list of Notify
Candidates.
3. Select the user or group from the list.
4. Set the First and Next intervals in the Notify Intervals screen. It is recommended
that you use the defaults. The First interval is the number of seconds the network
waits before it notifies candidates about a print job problem. The Next interval
specifies how often in seconds candidates are notified. Enter a number for each
interval and press the RETURN key.
5. Press the ESC key and then choose Save Changes. Press the ESC key at each
screen until you reach the Print Server Configuration menu. If you have finished
the configuration, press the ESC key and then save the changes.
4.1.7 Installing the Print Server on Multiple File Servers
To install the print server on more than one file server, perform the procedures
described in Sections 4.1.1 through 4.1.6 for each file server. You must use the same
name and password for the print server (or no password) on all file servers. You set the
password for the Print Server Card using the MAP program (refer to 4.3 Configuring
the Print Server Card in NetWare Directory Services). If you use a password, specify
it on each file server using the Change Password option on the Print Server Informa-
tion menu of the PCONSOLE utility.
described in Sections 4.1.1 through 4.1.6 for each file server. You must use the same
name and password for the print server (or no password) on all file servers. You set the
password for the Print Server Card using the MAP program (refer to 4.3 Configuring
the Print Server Card in NetWare Directory Services). If you use a password, specify
it on each file server using the Change Password option on the Print Server Informa-
tion menu of the PCONSOLE utility.
When the Print Server Card comes up, it automatically searches for and attaches to the
file servers that are no more than four hops and have no more than eight ticks propaga-
tion delay. For extremely large or complex networks, this allows a bounded search
time on start-up. If the print server must attach to file servers beyond this range, or, if
you wish to accelerate start-up by eliminating the need to search all file servers in the
four hops/eight ticks radius, the file servers with which the print server is to operate
may be entered into the Print Server Configuration of a primary file server. The pri-
mary file server can be any file server within the four hops/eight ticks propagation
time limits, but ideally is as close as possible to the print server. Once the print server
locates the primary file server and the list of file servers to be serviced, the automatic
file servers that are no more than four hops and have no more than eight ticks propaga-
tion delay. For extremely large or complex networks, this allows a bounded search
time on start-up. If the print server must attach to file servers beyond this range, or, if
you wish to accelerate start-up by eliminating the need to search all file servers in the
four hops/eight ticks radius, the file servers with which the print server is to operate
may be entered into the Print Server Configuration of a primary file server. The pri-
mary file server can be any file server within the four hops/eight ticks propagation
time limits, but ideally is as close as possible to the print server. Once the print server
locates the primary file server and the list of file servers to be serviced, the automatic
Click on the first or last page to see other AR-NC1D (serv.man3) service manuals if exist.