Read Sharp AR-NC1D (serv.man3) User Guide / Operation Manual online
Using MAP or Web Browser-2
2. Insert CD supplied with the Print Server Card into the CD ROM drive.
3. Once the CD’s self-running program has started, follow the directions on the
screen.
4. When the installation is complete, remove the CD from the CD drive.
3.2.2 Manual Install
1. Insert CD supplied in the Print Server card into the CD ROM drive.
2. Select
RUN
from the
Start
menu.
3. At RUN, type
<CD_Drive>:\MAP\SETUP.EXE
and click on the
OK
button.
4. Follow the instructions provided in the installation program screens.
5. When the installation is complete, remove the CD from the CD drive.
3.3
Using the MAP Program
When you start the MAP program, the program will prompt you with a list of IPX
print servers listed by their SAP identification and IP print servers by their IP address.
Select the print server you want to access. The program will setup a link to the print
server and display its configuration menu.
print servers listed by their SAP identification and IP print servers by their IP address.
Select the print server you want to access. The program will setup a link to the print
server and display its configuration menu.
3.4
Web IP Browser
Once you have assigned an IP address to your Print Server Card, you may use a web
IP browser, such as Netscape, to access the print server’s configuration menus. To
access the print server using a web browser,do the following:
IP browser, such as Netscape, to access the print server’s configuration menus. To
access the print server using a web browser,do the following:
1. Open up your browser.
2. For the URL, type in the IP address of the Print Server Card. The printer server’s
configuration menu should appear.
If you have problems, check to make sure you are using the correct IP address.
Click on the first or last page to see other AR-NC1D (serv.man3) service manuals if exist.