AR-NC1D (serv.man3). ARNC1D 3D NIC Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 17

 

NetWare Configuration-1

 

4

 

NetWare Configuration

 

Use this chapter if you will be printing from a Novell NetWare Operating System.
This chapter is divided into the following sections: 

•  

 

describes how to configure the Print Server Card for use 

with Version 3.x.  Use PCONSOLE to set up the print server  function.

•  

 

describes how to configure the 

Print Server Card for use with Version 4.x  Bindery Services.  Use PCONSOLE to 
set up the print server function.

•  

 

 describes how to configure the Print 

Server Card for use with Version 4.x Directory Services. Use NWADMIN to set up 
the print server function.

•  

 

 describes the parameters accessible via 

MAP or an IP Browser used to configure the Print Server for NetWare. 

•  

 

explains how to use the PCONSOLE utility 

to make changes to the configuration of the Print Server function.

 

Before configuring NetWare, you must determine if the Print Server Card has its
desired name. You  may use MAP or IP browser to do this. 

Before you begin:

•  Verify that you have supervisor privileges on the file servers on which the Print 

Server Card print server is to be entered.

•  Verify that your version of PCONSOLE is later than 1.0.

When you are finished turn the printer off and on again. The printer creates a status
report that indicates the file server(s) to which the unit is attached and the queues
which it services.

 

Follow these steps to start PCONSOLE: 

1. Log in to the network, type 

 

 and press the return key.

2. Choose 

 

 from the 

 

 menu. A list of 

file servers is displayed.