Read Sharp AR-NB3 (serv.man9) User Guide / Operation Manual online
25
HOW TO USE THE NETWORK SCANNER FUNCTION
2
TRANSMITTING A TWO-SIDED ORIGINAL
Follow these steps to automatically transmit a two-sided original. (This is only possible on models that have an RSPF installed.)
1
Make sure the machine is in scan
mode.
mode.
When the SCAN indicator is lit, the
machine is in scan mode. If the
indicator is not on, press the [SCAN]
key. If auditing mode has been
enabled for the scan function in the
key operator programs, a message
will appear prompting you to enter
machine is in scan mode. If the
indicator is not on, press the [SCAN]
key. If auditing mode has been
enabled for the scan function in the
key operator programs, a message
will appear prompting you to enter
your account number when you switch to scan mode. Enter your
account number (five digits) with the numeric keys. (
account number (five digits) with the numeric keys. (
Page 19
)
2
Place the original(s) in the document
feeder tray.
feeder tray.
For information on placing an original, see "4. COPY
FUNCTIONS" of the "Operation manual (for general
information and copier)".
FUNCTIONS" of the "Operation manual (for general
information and copier)".
3
Check the original size.
Press the [ORIGINAL SIZE] key to open the original
size selection screen. See
size selection screen. See
"MANUALLY SETTING THE
SCANNING SIZE" (page 26)
to set the original size.
4
Press the [DUPLEX SCAN] key.
The duplex mode
selection screen appears.
selection screen appears.
5
Select "2-SIDED" with the [
] or [
]
key.
6
Press the [OK] key.
The duplex original type
selection screen appears.
selection screen appears.
7
Select booklet or tablet for the duplex
original type with the [
original type with the [
] or [
] key.
8
Press the [OK] key.
You will return to the base screen and the duplex
scanning mode icon will appear.
scanning mode icon will appear.
9
Continue from step 4 of "BASIC
TRANSMISSION PROCEDURE" (
TRANSMISSION PROCEDURE" (
page 20
).
Do not use an original that is not a standard size (A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x
13", 8-1/2" x 11", 8-1/2" x 11"R, or 5-1/2" x 8-1/2").
Otherwise a scanning error or cut-off image may result.
13", 8-1/2" x 11", 8-1/2" x 11"R, or 5-1/2" x 8-1/2").
Otherwise a scanning error or cut-off image may result.
Note
COPY
LINE
DATA
SCAN
FAX
PRINT
EXP
SCAN COL
OPY
ATIO
ATIO
AUTO
IMAGE
OUTPUT
2-SIDED
COPY
SPE
FORMAT
BROADCAST
RESS
ORIGINAL SIZE DUPLEX SCAN
ORIGINAL SIZE
A3
B4
A4
A4
AB
TO
GE
OUTPUT
2-SIDED
COPY
SPECIAL FUNCTI
MAT
CAST
ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN
1-SIDED
2-SIDED
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
DUPLEX SCAN
1-SIDED
1-SIDED
2-SIDED
GHI
OK
BACK
DUPLEX STYLE
BOOKLET
BOOKLET
OK
• Two-sided scanning is not possible when "COLOUR MODE" is set to "COLOUR" or "GRAY".
• Booklets and tablets
• Booklets and tablets
Two-sided originals that are bound at the side are booklets, and two-sided
originals that are bound at the top are tablets.
originals that are bound at the top are tablets.
• Two-sided scanning mode turns off after the transmission is finished. Two-sided
scanning mode can also be cancelled by pressing the [CA] key.
• Two-sided scanning is only possible when an RSPF is used. Automatic scanning
of both sides of an original is not possible when the document glass is used.
• Two-sided scanning of originals longer than A3 (11" x 17") is not possible.
• To cancel two-sided scanning, select "1-SIDED" in step 5 and then press the [OK] key.
• To cancel two-sided scanning, select "1-SIDED" in step 5 and then press the [OK] key.
Note
BOOKLET
TABLET
Click on the first or last page to see other AR-NB3 (serv.man9) service manuals if exist.