Read Sharp AR-NB3 (serv.man9) User Guide / Operation Manual online
20
SENDING AN IMAGE
BASIC TRANSMISSION PROCEDURE
1
Make sure the machine is in scan
mode.
mode.
When the SCAN indicator is lit,
the machine is in scan mode.
If the indicator is not lit, press
the [SCAN] key. If auditing
mode has been enabled for
the scan function in the key
operator programs, a
the machine is in scan mode.
If the indicator is not lit, press
the [SCAN] key. If auditing
mode has been enabled for
the scan function in the key
operator programs, a
message will appear prompting you to enter your
account number when you switch to scan mode. Enter
your account number (five digits) with the numeric
keys. (
account number when you switch to scan mode. Enter
your account number (five digits) with the numeric
keys. (
Page 19
)
2
Place the original(s) in the document
feeder tray or on the document glass.
feeder tray or on the document glass.
For detailed information on placing an original, see "4.
COPY FUNCTIONS" of the "Operation manual (for
general information and copier)".
If you are using the document glass to send multiple
pages, place the first page first.
COPY FUNCTIONS" of the "Operation manual (for
general information and copier)".
If you are using the document glass to send multiple
pages, place the first page first.
3
Check the original size. If the original
is a non-standard size or the size was
not detected correctly, press the
[ORIGINAL SIZE] key.
is a non-standard size or the size was
not detected correctly, press the
[ORIGINAL SIZE] key.
When the [ORIGINAL SIZE] key is pressed, the size
selection screen appears. See
selection screen appears. See
"MANUALLY SETTING
THE SCANNING SIZE" (page 26)
to set the original size.
4
If needed, select the colour mode
(
(
page 27
).
To adjust the colour mode, press the [COLOUR
MODE] key. (See
MODE] key. (See
"SELECTING THE COLOUR
MODE" (page 27)
.)
5
If needed, select the resolution setting
(
(
page 27
).
The initial factory setting is [150dpi].
6
If needed, select the format (
page 28
).
The initial factory setting is [PDF].
7
Press the [ADDRESS] key.
You cannot place originals in both the
document feeder tray and on the document
glass and send them in a single transmission.
document feeder tray and on the document
glass and send them in a single transmission.
COPY
LINE
DATA
SCAN
FAX
PRINT
EXP
SCAN COL
Note
OPY
ATIO
ATIO
AUTO
IMAGE
OUTPUT
2-SIDED
COPY
SPE
FORMAT
BROADCAST
RESS
ORIGINAL SIZE DUPLEX SCAN
ORIGINAL SIZE
A3
B4
A4
A4
AB
COPY EXPOSURE
PAPER
SELECT
COP
RAT
RAT
SCAN
FAX
COLOUR MODE
PROGRAM
RESOLUTION ADDR
COPY EXPOSURE
PAPER
SELECT
COP
RAT
RAT
SCAN
FAX
COLOUR MODE
PROGRAM
RESOLUTION ADDRE
COLOUR MODE
COLOUR
GRAY
B/W
B/W
• Information on the destination can be
stored in the Web page.
• The sender name is normally set to the
name stored in "Reply E-mail Address" in
"SMTP Setup" in the Web page.
"SMTP Setup" in the Web page.
COPY EXPOSURE
PAPER
SELECT
COPY
RATIO
RATIO
AUT
IMAG
SCAN
FAX
COLOUR MODE
PROGRAM
FORM
BROADC
RESOLUTION ADDRESS
RESOLUTION
100dpi
100dpi
150dpi
200dpi
300dpi
300dpi
PER
LECT
COPY
RATIO
RATIO
AUTO
IMAGE
OUTPUT
2-SID
COP
FORMAT
BROADCAST
OLUTION ADDRESS
ORIGINAL SIZE DUPLEX
FORMAT
PDF
PDF G3
MULTI
ALL PAGES 1FILE
Note
OSURE
PAPER
SELECT
COPY
RATIO
RATIO
AUTO
IMAGE
OUTP
UR MODE
GRAM
FORMAT
BROADCAST
RESOLUTION ADDRESS
ORIGINA
DESTINATION SELECT
ADDRESS BOOK
ADDRESS ENTRY
ADDRESS SEARCH
ADDRESS SEARCH
Click on the first or last page to see other AR-NB3 (serv.man9) service manuals if exist.