Read Sharp AR-NB3 (serv.man9) User Guide / Operation Manual online
26
CHECKING THE SIZE OF A PLACED
ORIGINAL
ORIGINAL
When a standard-size* original is placed in the document feeder tray or on the
document glass, the original size is automatically detected (automatic original detection
function) and displayed in the original display. Make sure that the size has been
detected correctly.
(1) When an original is placed, an icon appears to indicate the original scanning mode.
document glass, the original size is automatically detected (automatic original detection
function) and displayed in the original display. Make sure that the size has been
detected correctly.
(1) When an original is placed, an icon appears to indicate the original scanning mode.
: One-sided scanning from the SPF
: Scanning from the document glass
: Two-sided scanning from the RSPF
: Scanning from the document glass
: Two-sided scanning from the RSPF
(2) The original size is displayed.
If a non-standard size original is placed or if you wish to change the scanning size, follow the steps below to
manually set the original scanning size.
If a non-standard size original is placed or if you wish to change the scanning size, follow the steps below to
manually set the original scanning size.
STORING SCANNING SETTINGS
Sets of scanning settings (scan size, colour mode, resolution, file type, etc.) can be stored for use in various
scanning applications.
scanning applications.
MANUALLY SETTING THE SCANNING SIZE
If you load an original that is not a standard size, or the original size is not correctly detected, be sure to press the
[ORIGINAL SIZE] key and set the original size manually.
Perform the following steps after loading the document in the document feeder tray or on the document glass.
[ORIGINAL SIZE] key and set the original size manually.
Perform the following steps after loading the document in the document feeder tray or on the document glass.
1
Press the [ORIGINAL SIZE] key.
The original size
selection screen will
appear.
selection screen will
appear.
2
Select the original size with the [
] or
[
] key.
The selected original size
is highlighted.
is highlighted.
To select an INCH size, press the [
] key and go to
step 4.
When the [
] key is
pressed, the original size
selection screen for INCH
sizes appears.
selection screen for INCH
sizes appears.
3
Press the [OK] key.
You will return to the base
screen and the selected original
size will appear in the original
display.
screen and the selected original
size will appear in the original
display.
* Standard sizes:
The following sizes are standard sizes: A3, B4, A4, A4R, B5, B5R, A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2"
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"). If a non-standard size original (including a special size) is placed, a
standard size close to the original size may appear, or the original size may not be displayed.
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"). If a non-standard size original (including a special size) is placed, a
standard size close to the original size may appear, or the original size may not be displayed.
Ready to scan.
XXXXX
COLOUR 150dpi
PDF MULTI
A4
COLOUR 150dpi
PDF MULTI
A4
(1)
(2)
Note
OPY
ATIO
ATIO
AUTO
IMAGE
OUTPUT
2-SIDED
COPY
SPE
FORMAT
BROADCAST
RESS
ORIGINAL SIZE DUPLEX SCAN
ORIGINAL SIZE
A3
B4
A4
A4
AB
GH
PQR
2-SIDED
COPY
SPECIAL FUNCTION
ORIGINAL SIZE
A3
B4
A4
AB
ORIGINAL SIZE
11x17
8 x14
8 x13
8 x13
INCH
1
2
1
2
GHI
OK
BACK
Click on the first or last page to see other AR-NB3 (serv.man9) service manuals if exist.