Read Sharp AR-M700 (serv.man26) Service Manual online
: Feb. 9 2004
1
AR-M550/M620/M700 SETTING AND ADJUSTMENTS 7 - 37
1) Go through the modes specified in Simulation 46-21.
2) Select the adjustment item SCANNER EXP. LEVEL using the
numeric keypad.
3) Press the Start key
4) Enter the image density adjustment value.
5) Press the P or Start key
Note: Adjusting the scanned image density through this simulation
changes the image density settings for all scan modes to the
image density level applied by carrying out this simulation.
image density level applied by carrying out this simulation.
The scan-mode image density settings for individual scan modes
adjusted through Simulations 46-22, -23, -24, -25, and -45 are
changed to the image density level applied by this simulation.
adjusted through Simulations 46-22, -23, -24, -25, and -45 are
changed to the image density level applied by this simulation.
Scanned images must be visually checked to ensure the post-adjust-
ment image density.
ment image density.
This adjustment is intended to the image mode for each scan mode
individually. In manual mode, the image density setting for each
scanned image density adjustment level (1 to 5) can be adjusted to a
custom density level.
individually. In manual mode, the image density setting for each
scanned image density adjustment level (1 to 5) can be adjusted to a
custom density level.
1) Set the test chart (UKOG-0162FCZZ) on the original table so that it
aligns with the front frame. Then put four or five pieces of A3 (11" x
17") paper.
17") paper.
3) Enter the number that corresponds to the following adjustment
item using the numeric keypad. (Choose from numbers 0 to 5.)
• Auto mode
• Manual mode (print density adjustment level)
For manual mode, select the number that corresponds to the
image density adjustment level (1 to 5). (Choose from numbers 1
to 5.)
image density adjustment level (1 to 5). (Choose from numbers 1
to 5.)
6) Press the Start key
7) Enter the image density adjustment value.
8) Press the P or Start key
Scanned images must be visually checked to ensure the post-adjust-
ment image density.
ment image density.
Press [START] key.
Press [START] key, or
press [CUSTOM SETTINGS] key.
press [CUSTOM SETTINGS] key.
Item
Set
range
Default
0
SCANNER EXP. LEVEL
Image density level
0 - 99
50
ADJ 11B
Scan mode image density adjustment/
individual setup (standard mode)
individual setup (standard mode)
ADJ 11C
Scan mode image density adjustment/
individual setup (small-character mode)
individual setup (small-character mode)
ADJ 11D
Scan mode image density adjustment/
individual setup (fine mode)
individual setup (fine mode)
ADJ 11E
Scan mode image density adjustment/
individual setup (super fine mode)
individual setup (super fine mode)
0
SIMULATION 46-21
EXP.LEVEL SETUP SCANNER(AUTO SET), PRESS START.
0.SCANNER EXP.LEVEL
50
50
SIMULATION 46-21
EXP.LEVEL SETUP SCANNER(AUTO SET), INPUT VALUE 0-99,
AND PRESS START.
0.SCANNER EXP.LEVEL
00
2) Go through the simulation modes that correspond to the scan
modes for which to adjust the scanned image density (i.e., the
modes specified in Simulations 46-22, -23, -24, or -25).
modes specified in Simulations 46-22, -23, -24, or -25).
Press [START] key.
Press [START] key, or
press [CUSTOM SETTINGS] key.
press [CUSTOM SETTINGS] key.
Item
Set
range
Default
0
SCANNER EXP. LEVEL
Image density level
0 - 99
50
Select other than 0 - 5, and
press [START] key.
press [START] key.
Press [START] key, or press
[CUSTOM SETTINGS] key.
[CUSTOM SETTINGS] key.
Item
Set
range
Default
0
AUTO
Auto
0 - 99
50
1
1.0
Exposure level 1
2
2.0
Exposure level 2
3
3.0
Exposure level 3
4
4.0
Exposure level 4
5
5.0
Exposure level 5
1
0
SIMULATION 46-21
EXP.LEVEL SETUP SCANNER(AUTO SET), PRESS START.
0.SCANNER EXP.LEVEL
50
50
SIMULATION 46-21
EXP.LEVEL SETUP SCANNER(AUTO SET), INPUT VALUE 0-99,
AND PRESS START.
0.SCANNER EXP.LEVEL
1
SIMULATION 46-22
EXP.LEVEL SETUP SCANNER(NORMAL). SELECT 0-5, AND PRESS
START.
0.AUTO
50
1.1.0
50
2.2.0
50
3.3.0
50
4.4.0
50
5.5.0
50
50
SIMULATION 46-22
EXP.LEVEL SETUP SCANNER(NORMAL), INPUT VALUE 0-99, AND
PRESS START.
0.AUTO
Click on the first or last page to see other AR-M700 (serv.man26) service manuals if exist.