Read Sharp AR-M550 (serv.man15) Service Manual online
AR-M550/M620 SIMULATION 8 - 75
2) Press [START] key.
(Resist adjustment)
1) Enter the resist adjustment value with 10-key.
2) Press [START] key.
When [START] key is pressed, the adjustment value is set and
paper feed and copying are performed.
paper feed and copying are performed.
(Copy condition setting in this simulation)
∗
To select paper (paper feed tray), perform the following procedures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed tray
selection mode.)
3) Enter the number corresponding to the paper feed tray to be used
with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
When the total of the above set value (1 - 6) and 10 is entered, the
mode is changed to the duplex print mode.
mode is changed to the duplex print mode.
NOTE: When [P] key is pressed after entering the adjustment value in
this simulation, the adjustment value is set. When [START] key
is pressed, the adjustment value is set and copying is per-
formed.
is pressed, the adjustment value is set and copying is per-
formed.
Operation/Procedure
1) Set the SPF paper feed guide to the max. position.
2) Select "MAX. POSITION" with 10-key.
3) Press [START] key.
The max. width detection level is recognized.
4) Press [CSUTOM SETTING] key.
5) Set the SPF paper feed guide to A4R size position.
6) Select POSITION 1 with 10-key.
7) Press [START] key.
The A4R width detection level is recognized.
8) Press [CSUTOM SETTING] key.
9) Set the SPF paper feed guide to A5 size position.
10) Select POSITION 2 with 10-key.
11) Press [START] key.
The A5 width detection level is recognized.
12) Press [CSUTOM SETTING] key.
13) Set the SPF paper feed guide to the min. position.
14) Select "MIN. POSITION" with 10-key.
15) Press [START] key.
The min. width detection level is recognized.
If the above procedures are not completed normally, ERROR is dis-
played. When completed normally, COMPLETE is displayed.
played. When completed normally, COMPLETE is displayed.
10 SPF (HIGH)
SPF resist adjustment value
(High speed)
(High speed)
0 - 99
50
11 SPF (LOW)
SPF resist adjustment value
(Low speed)
(Low speed)
12 SPF FEED
(TOP)
SPF paper fed resist
adjustment value (Top speed)
adjustment value (Top speed)
–
–
13 SPF FEED
(HIGH)
SPF paper feed resist
adjustment value (High
speed)
adjustment value (High
speed)
–
–
14 SPF FEED
(LOW)
SPF paper feed resist
adjustment (Low speed)
adjustment (Low speed)
–
–
Normal display
NOW PRINTING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
6
LCC
LCC
Item
Set
range
Default
Select 0, and
press [START] key.
press [START] key.
Press [START] key, or
press [CUSTOM SETTINGS] key.
press [CUSTOM SETTINGS] key.
53
53-6
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the DSPF width detection level.
Section
Item
Operation
50
1
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. SELECT 0-14, AND PRESS START.
0.TRAY SELECT
1
1.PRINT START
2.TRAY1
50
3.TRAY2
50
4.TRAY3
50
5.TRAY4
50
6.BPT
50
7.LCC
50
8.ADU
50
9.SPF(TOP)
50
10.SPF(HIGH)
50
11.SPF(LOW)
50
12.SPF FEED(TOP)
50
13.SPF FEED(HIGH)
50
14.SPF FEED(LOW)
50
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. NOW PRINTING.
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. INPUT VALUE 0-99, AND PRESS
START.
1.TRAY1
Select 1,
and press
[START] key.
and press
[START] key.
Select other than 0 - 1, and
press [START] key.
press [START] key.
Press [CUSTOM SETTINGS] key.
Press [START] key.
Press [CUSTOM SETTINGS] key,
or terminate copying.
or terminate copying.
1
SIMULATION 51-2
RESIST TIMING ADJUSTMENT. SELECT 1-15, AND PRESS START.
(FEED TRAY)
1.TRAY1 2.TRAY2 3.TRAY3 4.TRAY4
5.BPT 6.LCC
(ABOVE+10: DUPLEX MODE)
Click on the first or last page to see other AR-M550 (serv.man15) service manuals if exist.