Read Sharp AR-M351U / AR-M451U (serv.man17) Service Manual online
AR-M351U/M451U, AR-M355U/M455U SIMULATION 9 - 8
Operation/Procedure
1) Select the number corresponding to the target of operation
check with 10-key.
2) Press START key.
The load selected in procedure 1 is operated.
Press [CUSTOM SETTINGS] key to stop the operation of the load.
Operation/Procedure
The operating conditions of the sensors and detectors are dis-
played.
played.
The active sensors and detectors are highlighted.
• The following units are added when the punch unit is installed to
the console finisher:
2-3
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operations of the loads in the
automatic document feeder unit and the control
circuits.
automatic document feeder unit and the control
circuits.
Section
DSPF
Item
Operation
1
MOTOR(H)
Motor high speed
2
MOTOR(L)
Motor low speed
3
SDSS
SPF gate solenoid
4
SPFS
SPF pick-up solenoid
5
SPFC
SPF paper feed clutch
6
SRRC
SPF resist roller clutch
7
STMPS
Stamp solenoid
Press [START] key, and the
operation is started.
operation is started.
Press [CUSTOM SETTINGS] key, and the
operation is stopped.
operation is stopped.
3
3-2
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operation of sensor and
detector in the finisher and the related circuit.
detector in the finisher and the related circuit.
Section
Finisher
Item
Operation
SIMULATION 2-2
SPF SENSOR CHECK.
SPFSET
SOCD
SCOV
SPED
SPPD SPOD
SWD6
SWD5
SWD4 SWD3 SWD2 SWD1
SPLS2 SPLS1
CISSET
STSET
SWD_LEN:
2100
SWD_AD:
600
SIMULATION 2-3
SPF LOAD TEST. SELECT 1-7, AND PRESS START.
1.MOTOR(H) 2.MOTOR(L)
3.SDSS 4.SPFS 5.SPFC 6.SRRC
7.STMPS
2
SIMULATION 2-3
SPF LOAD TEST. EXECUTING···.
1.MOTOR(H) 2.MOTOR(L)
3.SDSS 4.SPFS 5.SPFC 6.SRRC
7.STMPS
2
Built-in finisher
STHP
Stapler HP detection
POD
Tray 2 paper exit detection
SCID
Staple compiler paper entry detection
PID
Paper entry detection
T2PD
Tray 2 paper empty detection
T2DN
Tray 2 lower limit detection
T2UP
Tray 2 upper limit detection
JRHP
Jogger R HP
JFHP
Jogger (F) HP
SCID2
Staple compiler paper entry detection 2
STTHP2
Staple rotation HP detection 2
STTHP1
Staple rotation HP detection 1
STUHP
Staple shift HP detection
PSHP
Pusher HP detection
PPD
Paper hold return detection
DSW2
Staple replacement door open detection
DSW1
Compiler jam cancel door open detection
24VM
24V power supply
T1PF
Tray 1 full detection
STSP
Stapling ready detection
STLS
Cartridge inside spare staple empty detection
STNC
Cartridge empty detection
DOPD
Interface unit door open detection
MMLK
Main drive motor lock detection
SCPD
Staple compiler paper empty detection
Console finisher
FSSS
Stapler safety switch
FJS
Joint switch
FFDSW
Front door switch
FTCS
Upper cover sensor
FFDS
Front door sensor
FSPS
Self prime sensor
FSUC
Stapler connection detection
FSS
Staple sensor
FSTHPS
Stapler HP sensor
FSHPS
Slide HP sensor
FLE
Lift lock sensor
FLLLS
Lift lower limit sensor
FULS
Lift upper limit sensor
FFE
Bookbinding clock sensor
FFES
Bookbinding paper sensor
FFRHPS
Bookbinding roller HP sensor
FFHPS
Bookbinding HP sensor
FFPS
Bookbinding position sensor
FSLS
Paper surface sensor
FBES
Tray paper sensor
FOBHPS
Paper exit belt HP sensor
FAS
Alignment tray sensor
FRJHPS
Alignment HP sensor R
FFJHPS
Alignment HP sensor F
FARHPS
Bundle roller HP sensor
FPHPS
Paddle HP sensor
FES
Entry port sensor
FPE
Punch motor encoder
FPSHPS
Punch side register HP
FPUC
Punch connection detection
FPDS
Punch dust sensor
FPDSS4
Punch side register sensor 4
FPDSS3
Punch side register sensor 3
FPDSS2
Punch side register sensor 2
FPDSS1
Punch side register sensor 1
FPTS
Punch timing sensor
Click on the first or last page to see other AR-M351U / AR-M451U (serv.man17) service manuals if exist.