Read Sharp AR-LC8 Service Manual online
AR-LC8 UNPACKING AND INSTALLATION 3 - 3
2) Cut out the portion of the power supply cover shown in the
illustration.
3) Hang the two pawls of the power supply cover on the rear cab-
inet and attach the cover with the screw.
4) Connect the relay harness connector of the large c capacity
paper feed tray to the connector of the option desk, and
tighten the screw attached to the connector to fix the connec-
tor.
tighten the screw attached to the connector to fix the connec-
tor.
C. Fixing material and packaged part removal
1) Remove the fixing material from the large capacity paper feed
tray.
2) Remove the fixing material from the packaged part, and
remove the packaged part.
D. Remove the paper feed base screw of the
large capacity tray.
1) Slowly pull out the paper feed base tray until it stops.
2) Remove the paper feed base fixing screw (1 pc.) of the large
capacity tray.
3) Push the large capacity tray slowly into the original position.
Cut-out
portion
portion
Power
supply cover
supply cover
Power
supply cover
supply cover
Pawls
Screw
Connector
Screw
Click on the first or last page to see other AR-LC8 service manuals if exist.