Read Sharp AR-LC8 Service Manual online
AR-LC8 UNPACKING AND INSTALLATION 3 - 1
[3] UNPACKING AND INSTALLATION
1. Unpacking
2. Before installation
• Start installation after checking that the DATA indicator on the
operation panel is neither lit nor blinking.
• For installation of AR-LC8, an optional stand (AR-D19N) must
have been installed.
• Ensure that the connecting plate located on the front side of the
optional stand and the connecting plates on the sides (one on
the right side and left side respectively) are securely attached.
the right side and left side respectively) are securely attached.
Parts included
3. Installation
A. Power OFF procedure
(1) Turn off the power.
1) Turn off the power switches on the left side and on the rear
side of the machine.
2) Disconnect the power plug from the power outlet.
B. Large capacity paper feed tray installation
(1) Attach the mounting plates A and B.
1) Attach the two upper mounting plates with the rubber portion
(
★
) down to the right side of the main unit using screws B (two
for each). (See the illustration below.)
2) Attach the mounting plate to the lower right side of the optional
stand using two screws A.
Mounting plate:
1 pc.
Upper mounting
plate: 2 pcs.
Securing
plate: 1 pc.
Connecting
plate: 1 pc
Screw A
(4 x 12, hexagonal
washer based): 2 pcs.
Screw B
(4 x 18, hexagonal
washer based): 4 pcs.
Screw C:
1 pc.
Screw D:
2 pcs.
1
Screws B
Screws A
Upper
mounting
plate
mounting
plate
Upper
mounting
plate
mounting
plate
Mounting
plate
plate
<Note>
Upper
mounting
plate
mounting
plate
Rubber
portion
portion
Click on the first or last page to see other AR-LC8 service manuals if exist.