AR-FX5. ARFX5-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 9

AR-FX5 UNPACKING AND INSTALLATION 5-2

6) Reattach the MFP control PWB unit.

Reattach the MFP control PWB unit to the printer and secure it with

the five screws.

7) Attach the FAX box unit.

<1>Secure screw A to the rack.

<2> Hang the positioning hole on the side of the FAX box unit on screw

A, slide the FAX box unit toward the rack, and secure the rack and

the FAX box unit with two screws B.

8) Attach the FAX power cord to the printer.

Remove the screw of the connector cover for connection of FAX

power supply connector on the main unit of the printer, and remove
the connector cover. Then, connect the FAX power supply connector

to the connector on the main unit of the printer and tighten the three

screws on the connector to secure the connector.
Ensure that the FAX power switch is in the OFF position.

9) Connect each connector of the FAX box unit.

Connect the FAX I/F cable to the FAX box unit and the MFP control

unit and then connect the line cable to the FAX box unit.

Connect the scanner cable that has been removed in step 2).

10) Turn the main switch of the printer to ON.

Insert the power plug of the printer to the outlet and turn the main
switch and the FAX power switch of the FAX box unit to ON.

11) Check the destination.

The following procedure indicates U.K. as an exsample.

Use SIM26-6 to check the destination of the machine.

Use SIM66-2 to check the destination the FAX box.

Set up the FAX  Software SW1 for the destination as follows.

*

If the destination differs from that of the machine, change it into the
same destination.

Screw

Screw A

Screws B

FAX box unit

Positioning hole

Rack

Screw A

Screw

FAX power cord

FAX power switch

OFF

Screw

Screw

Connector cover

Destination

FAX Software SW No.1 - 8

U.K.

1

0

1

1

0

1

0

0

France

0

0

1

1

1

1

0

1

Germany

0

0

0

0

0

1

0

0

Australia

0

0

0

0

1

0

0

1

New  Zealand

0

1

1

1

1

1

1

0

Sweden

1

0

1

0

0

1

0

1

TEL

LINE

Line cable

FAX I/F cable

Scanner cable

SIMULATION 26-6
DESTINATION SETUP. SELECT 1-10, AND PRESS START.
1. USA     2. CANADA    3. INCH
4. JAPAN     5.AB _B
6. EUROPE     7. UK     8. AUSTRALIA
9. AB_A     10. CHINA

7

1

U.K.

SIMULATION 66-2
FAX SOFT SW. CLEAR.
ARE YOU SURE?

1:YES
2:NO

10110100

SIMULATION 66-2
FAX SOFT SW.CLEAR (WIHTOUT ADJUSTMENT VALUE).
INPUT COUNTRY CODE, AND PRESS START.

1  2  3  4  5  6  7  8

Press [START] key.  

 (   !" #$%%&'