AR-FX5. ARFX5-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 13

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-4

Purpose

Data clear

Function (Content)

Used to clear the FAX counter. 

Section

FAX

Item

Counter

Operation/Procedure Select with 10 digit key pad and press START 

key. 
The procedure below is executed and the display 
returns to the original state.
1: Counter is cleared  2: Not cleared

1

FAX SEND: Number of times of FAX sending

2

FAX RECEIVE: Number of times of FAX reception

3

FAX OUTPUT: FAX print quantity

4

SEND IMAGES: Sending quantity

5

SEND TIME: Time for sending

6

RECEIVE TIME: Time for reception

1

SIMULATION 24-10
FAX SEND COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO

1

SIMULATION 24-10
FAX COUNTER DATA CLEAR. SELECT 1-6, AND PRESS START.
1. FAX SEND
2. FAX RECEIVED
3. FAX OUTPUT
4. SEND IMAGES
5. SEND TIME
6. RECEIVE TIME

Press [START] key.  

Press [CUSTOM SETTING] key 
             or [START] key.

Purpose

Adjustment

Function (Content)

Used to adjust the print density in the FAX mode 
(all modes). An adjustment with this simulation 
affects all the reading density adjustment values. 
(Only when FAX is installed)

Section
Item

Picture quality

Operation/Procedure The exposure mode to be set is selected. 

(FAX auto adjustment)
1) The current set value is highlighted on the

right side of each item. In this screen, be sure
to select "1: COPY START." (Set value: 1)

2) Set the exposure level with 10 digit key pad. 

Press P to store the set value. 
(Default: 50, set range: 0 - 99)

3) Press START, and copying is started and the

set value is stored. (Display value 1)

4) Select a paper feed tray. (Set value 2)

0

Paper feed tray selection

1

Copy start (Default)

2

FAX mode exposure setup

Normal display

NOW COPYING

ERROR display

Door open

DOOR OPEN.

Jam

JAM

paper empty

PAPER EMPTY.

1

TRAY1

2

TRAY2

3

TRAY3

4

TRAY4

5

Manual feed

SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). SELECT 0-2, AND PRESS START.
0. TRAY SELECT              1. COPY START
2. FAX EXP. LEVEL

1

SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET),INPUT VALUE 0-99, AND PRESS
 START.
2. FAX EXP. LEVEL

50

SIMULATION 46-12
EXP.  LEVEL SETUP FAX (AUTO SET). SELECT 1-5, AND PRESS START. 
(FEED TRAY)
1. TRAY1  2. TRAY2  3. TRAY3  4. TRAY4  5.BPT

1

SIMULATION 46-12
EXP. LEVEL SETUP FAX (AUTO SET). NOW COPYING.

1

50

Press [CUSTOM SETTING] key.

Select other than 0 - 1, 
and press [START] key.  

Select 1, and 
press [START] key.  

Select 0, and 
press [START] key.  

Press [START] key.  

Press [START] key or 

press [CUSTOME SETTING] key.

Press [CUSTOM SETTING] key.
Or copying is terminated.

    /   !"# %&# '())*+,