AR-FX5. ARFX5-Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 6

AR-FX5 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-2

The condition setting screen of fax mode is displayed by pressing the IMAGE SEND key while the print mode, copy mode, or job status screen appears

in the touch panel. In the explanations that follow, it is assumed that the initial screen that appears after pressing the IMAGE SEND key is the condition
setting screen (shown below). If you have set the display to show the address directory (following page) when the IMAGE SEND key is pressed, touch

the CONDITION SETTINGS key in the address directory to display the condition setting screen.

The key operator program can be used to set the display to show either the condition setting screen (shown below) or the address directory screen
(following page) when the IMAGE SEND key is pressed.

The display is initially set (factory setting) to show the following condition setting screen as the initial screen.

1 Message display

Messages appear here to indicate the current status of the machine. 
When the machine is ready to send, an icon appears to the left.

2 Memory and reception mode display This shows the amount of fax memory that is free and the currently selected reception mode.
3 SPEAKER key

This key is used for dialing with the speaker. During dialing it changes into the PAUSE key, and after 
pressing the SUB ADDRESS key it changes into the SPACE key.

4 REDIAL key

Touch this key to redial the most recently dialed number. After dialing, this key changes into the NEXT 
ADDRESS key.

5 ADDRESS DIRECTORY key

This displays the Address Directory screen (next page). 
Touch this key when you want to use an auto-dial number (one-touch dialing or group dialing).

6 SUB ADDRESS key

Touch this key to enter a sub-address or passcode.

7 ADDRESS REVIEW key

When performing a broadcast transmission, touch this key to check your selected destinations. 
Your selected destinations will appear as a list, and the list can be edited.

8 Two-sided scanning and verification 

stamp icon display

Icons appear here when you touch the ORIGINAL key and select two-sided scanning and/or the verification 
stamp function (when the optional verification stamp unit is installed). 
The icons can be touched to open function selection screens.

9 ORIGINAL key

Touch this key when you wish to manually set the size of the original to be scanned, scan both sides of the 
original, or use the verification stamp option.

10 RESOLUTION key

Touch this key to change the resolution setting for the original to be scanned. 
The selected resolution setting will be highlighted above the key. The initial factory setting is STANDARD.

11 SPECIAL MODES key

Touch this key to select one of the following special functions:
•Timer transmission •Polling •Dual page scan •Exposure •Program •Memory box

12 Special function icon display 

When a special function such as polling or dual page scan is selected, a special function icon appears here.

SPECIAL MODES

AUTO

READY TO SEND.

ORIGINAL

STANDARD

RESOLUTION

SUB ADDRESS

ADDRESS REVIEW

REDIAL

SPEAKER

FAX MEMORY:100%

AUTO RECEPTION

ADDRESS
DIRECTORY

 '     !"#$%&