Read Sharp AR-FX13 Service Manual online
AR-FX13 SIMULATION 4 - 6
66
05
Signal send mode
(Soft SW set value)
(Soft SW set value)
[Function]
Use to set the signal send mode (Soft SW set value).
Use to set the signal send mode (Soft SW set value).
Facsimile simulation design specifications.
[Operation]
07
Image memory
content print
content print
[Function]
Use to print the image memory content.
Use to print the image memory content.
[Operation]
10
Image memory
content clear
content clear
[Function]
Use to clear the image memory content.
Use to clear the image memory content.
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
1
NO SIGNAL
13
7200bps(V34)
25
2400bps(V27ter)
2
33600bps(V34)
14
4800bps(V34)
26
300bps(FLAG)
3
31200bps(V34)
15
2400bps(V34)
27
2100Hz(CED)
4
28800bps(V34)
16
14400bps(V33)
28
1100Hz(CNG)
5
26400bps(V34)
17
12000bps(V33)
29
300bps(V21)
6
24000bps(V34)
18
14400bps(V17)
30
2100Hz(ANSam)
7
21600bps(V34)
19
12000bps(V17)
31
DUMMY RING
8
19200bps(V34)
20
9600bps(V17)
32
NO VOICE ANSWER
9
16800bps(V34)
21
7200bps(V17)
33
NO RING BACK TONE
10
14400bps(V34)
22
9600bps(V29)
34
LINE OFF HOOK
11
12000bps(V34)
23
7200bps(V29)
35
LINE ON HOOK
12
9600bps(V34)
24
4800bps(V27ter)
1) Initial display
2) 2-digit (1-35) with [Numeric] key / [
] [
] key / 2sec after
Pressing [
] key or [
] key reverses the sequence.
∗ [Clear] key: Returns to the main-sub code input display.
3) [ENTER]/[OK] key: Send after setting
3) [ENTER]/[OK] key: Send after setting
∗ [Clear] key: Returns to "1) Initial display".
SELECT OUTPUT SIGNAL
(2 DIGITS) No.___
No. (1-35)
1:NO SIGNAL
.....
No. (1-35)
35:LINE ON HOOK
OUTPUTING SIGNAL SSW
PRESS CLEAR TO STOP
• When print is allowed
After completion of printing,
main code and sub code input
display.
main code and sub code input
display.
• When there is no print data
After 2 sec, FAX control is
terminated.
terminated.
• When print is inhibited
After 2 sec, main code and sub
code input display.
code input display.
PRINT STORED
NO DATA
CAN NOT PRINT
• When there are some print data
After completion of memory clear, the buzzer
sounds.
sounds.
Remains unchanged until the power is turned
off.
off.
• When there are no print data
After completion of memory clear
After 2sec, main code and sub code input dis-
play.
play.
CLEAR IMAGE MEMORY
CLEARED
PLEASE POWER OFF
CLEAR IMAGE MEMORY
CLEARED
Click on the first or last page to see other AR-FX13 service manuals if exist.