AR-FX13. Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 14

AR-FX13  SIMULATION  4 - 4

46

39

FAX mode sharpness 
adjustment

[Function]
When [START] key is pressed, scan is started with the entered sharpness adjustment value, and the
data of the selected mode stored on the FAX side is changed to the entered value.

66

01

FAX soft SW setting

[Function]
Use to check the FAX soft SW setting.
Every time when the key is pressed, the bit on the first line is switched 0 and 1.

02

FAX soft SW 
initializing (excluding 
the adjustment values)

[Function]
Use to initializing FAX soft SW.

Main 
code

Sub 

code

Contents

Details of function/operation

Sharpness adjustment value data table

When initializing each data: 1

Mode

Sharpness adjustment value

1: STD

2: FINE

3: S-FINE

4: FINE/PHOTO

5: S-FINE/PHOTO

1) Initial display

2) [

] [

] key or after 2sec

Every time when [

] key is pressed, the

second line is changed in the sequence of
No. 1 

→ 2 → 3 → 4 → 5 → 1.

When [

] key is pressed, the sequence is

reversed.

3) Select the arrow key 1-5, and the LED of

[START] key is lighted.

("ZZZZ" is the mode selected among STD,
FINE, S-FINE, FINE/PHOTO, and S-FINE/
PHOTO.)

("X" is the corresponding sharpness adjustment
value of the selected mode stored on the FAX
side.)
∗ [Clear] key: Returns to “2)” display.

4) Enter a one-digit value (0-2) as the sharp-

ness adjustment value with [Numeric] key.

("Y" is the entered sharpness adjustment value.)
∗ [Clear] key: Returns to “2)” display.

5) Press [START] key.

Scan start (self print)

6) Print start (self print)

After completion of printing, returns to “4)” 
display.

SHARPNESS SETTING

PRESS 

←

,

→

SHARPNESS SET (1-5)

1:STD

SHARPNESS SETTING

ZZZZ(0-2)       X

SHARPNESS SETTING

ZZZZ(0-2)       Y

SHARPNESS SETTING

 SCAN           Y

SHARPNESS SETTING

 PRINT          Y

1) Initial display

∗ [Clear] key: Returns to the main-sub code

input display.

2) Enter a 3-digit value of soft SW No. (To

enter the fourth digit, shift to the left.), and
the press [ENTER]/[OK] key.

"xxxxxxxx" is the set content.
∗ Select 2: Returns to the soft SW No. entry dis-

play.

3) Select 1

4) Change with 1-8 of [Numeric] key and the

press [ENTER]/[OK] key.

"xxxxxxxx" is the set content.
∗ Select 2: Returns to the soft SW No. entry dis-

play.

5) Select 1

After 2sec, returns to "1) Initial display".

ENTER FAX SOFT SW. #

(3 DIGITS)    SW.___

No.###    xxxxxxxx

CHANGE?   1:YES 2:NO

No.###    xxxxxxxx

USE # KEY   12345678

No.###    xxxxxxxx

STORED?   1:YES 2:NO

STORED

1) Initial display

After 2sec, main code and sub code input display.

INITIALIZED