Read Sharp AR-FX11 (serv.man2) Service Manual online
AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-1
[6] SIMULATIONS, FAX SOFTWARE SWITCH
1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
[#]
[*]
[C]
[*]
[Main code]
[START]
[Sub code]
[START]
2. Canceling the simulation mode
When the clear all key is pressed, the simulation mode is cancelled.
When the interruption key is pressed, the process is interrupted and the
When the interruption key is pressed, the process is interrupted and the
screen returns to the sub code entering display.
* After canceling the simulation mode, be sure to turn OFF/ON the
power and check the operation.
Note:
• If the machine is terminated by a jam error or paper empty during
• If the machine is terminated by a jam error or paper empty during
copying in the adjustment by the simulation, recopying is required.
• The values in the simulation columns are not default values but sample
values.
3. Simulation list
CODE
FUNCTION(Contents)
MAIN
SUB
22
11
FAX-related counter display
24
10
FAX-related counter clear
46
12
Density adjustment in the FAX mode
(Collective adjustments)
(Collective adjustments)
13-16
Density adjustment in the FAX mode
(Individual adjustments)
(Individual adjustments)
39
FAX sharpness adjustment
48
8
FAX magnification ratio adjustment
(scan)
(scan)
9
FAX magnification ratio adjustment
(print)
(print)
50
8
FAX lead edge adjustment (scan)
9
FAX lead edge adjustment (print)
66
1
FAX soft SW setting
2
FAX soft SW initializing
3
FAX PWB memory check
4
Signal send mode
6
Print pass code print
7
Image memory content print
10
Image memory contents clear
11
300bps signal send
13
Dial test
17
DTMF signal send
19
SRAM backup
21
FAX information print
24
FAST SRAM clear
30
TEL/LIU status change check
31
TEL/LIU setting
32
Receive data check
33
Signal detection check
34
Communication time measurement
37
Speaker sound volume adjustment
38
Time setting/check
41
CI signal check
52
Pseudo ringer check
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 1 ページ ２００４年１１月１２日 金曜日 午後２時２４分
Click on the first or last page to see other AR-FX11 (serv.man2) service manuals if exist.