Read Sharp AR-FX11 (serv.man2) Service Manual online
AR-FX11 UNPACKING AND INSTALLATION 5-2
4) Reattach the rear cover.
<1>Insert the claw locks of the rear cover into the copier, and slide it to
<1>Insert the claw locks of the rear cover into the copier, and slide it to
left until they are securely locked.
<2>Secure the cover using two screws.
5) Remove keyboard back cover.
<1>Unscrew two screws from the keyboard back cover.
<2>Release the lock as shown, and remove the back cover.
<2>Release the lock as shown, and remove the back cover.
6) Remove dummy panel.
<1>Unscrew from the dummy panel.
<2>Push the dummy panel up using a driver as shown, and remove it
from the copier.
7) Attach FAX keyboard.
<1>Connect the copier flat cable to FAX keyboard.
<2>Place the FAX keyboard onto the copier.
<3>Secure the keyboard using a screw.
<3>Secure the keyboard using a screw.
8) Reattach keyboard back cover.
<1>Insert the claw lock of the keyboard back cover into the copier. Make
<1>Insert the claw lock of the keyboard back cover into the copier. Make
sure that the claw lock is securely inserted.
<2>Secure the cover using two screws.
9) Paste FCC label on the rear cabinet of the copier.
After installing FAX Expansion Kit, paste the supplied FCC label on
the position shown in the illustration.
10) Setup date and time.
Press [FUNCTION] key on the Operation Panel, select [Key Operator
Program], enter 5-digit key operator code, and select [FAX] mode.
Select [Initial setup] and then [Date and Time]. Enter date in the
order of year, Month, Day and press [OK] to set.
order of year, Month, Day and press [OK] to set.
Select [Time Setup], enter time in the order of Hour and Minute, and
press [OK] to set.
11) Clear image memory.
* When additional memory board (AR-MM9) is installed, you must clear
* When additional memory board (AR-MM9) is installed, you must clear
the memory using the Simulation [66-10]. If no additional memory is
installed, there is no need for this memory clear process.
12) Connect line cable.
Connect the line cable to the FAX Expansion Kit.
Connect the line cable to the FAX Expansion Kit.
USA, Canada only
In order to manifest the compliance with FCC Part 68 and IC CS-03, it
In order to manifest the compliance with FCC Part 68 and IC CS-03, it
is required to provide the machine with the FCC Registration Number
(USA), Ringer Equivalence (USA) and Ringer Eqivalence(Canada).
After installing the FAX expansion kit in the machine, please put the
After installing the FAX expansion kit in the machine, please put the
registration label, packed with the kit, on the prescribed location.
Insert the power plug of the copier to the outlet, and then turn on the
main switch of the copier.
main switch of the copier.
[05]UNPACKINGANDINSTALLATION.fm 2 ページ ２００４年１１月１２日 金曜日 午後２時２３分
Click on the first or last page to see other AR-FX11 (serv.man2) service manuals if exist.