AR-FR12. Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 5

3

This section explains the key operator programs in the unit that are related to the security function.

For the procedure for using the key operator programs, see the KEY OPERATOR'S
GUIDE. (In addition, see "KEYS USED IN KEY OPERATOR PROGRAMS" on page 3.)
For information on settings and procedures, see the following explanation.

Key Operator Code Change
This program is used to change the key operator code. The key operator is required to
change the key operator code from the factory default to a new user selected code. Under
no circumstances should the Key Operator use the default "Key Operator Code". The key
operator is responsible for changing the Key Operator Code to a new code at least every 60
days. See the KEY OPERATOR'S GUIDE (in particular, see "USING THE KEY
OPERATOR PROGRAMS" on page 2).

When the security kit is installed, the [SECURITY SETTINGS] key is added to the
"DEVICE CONTROL" screen of the key operator programs. The following screen
appears when the [SECURITY SETTINGS] key is pressed.

* Detailed procedures for using the above programs can be found on the following page.

Program name

Page

CLEAR ALL MEMORY

4

POWER UP AUTO CLEAR

5

DATA SECURITY KIT

5

KEY OPERATOR PROGRAMS

SECURITY SETTINGS

CLEAR ALL MEMORY

POWER UP AUTO CLEAR

2

1

OK

ARFR12_SEC.book  3 ページ  ２００４年２月１５日　日曜日　午後７時１４分