AR-FR12. Operation Manual - Sharp Copying Equipment User Guide / Operation Manual. Page 4

2

When the data security kit is installed, the following icon 
appears on the touch panel. In the job status screen, touch 
the icon (

) to view information on the data security kit 

version.

When the security kit is installed, data remaining in the unit is automatically erased after
each copy, print, scan, and fax*

1

 job.

When data clearing begins, the following message appears for 6*

2

 seconds.

●

The message and progress bar are not
displayed while the data of a fax job is being
erased.

If the job is large and more than 6*

2

 seconds is required to clear the data, the following 

progress bar appears:

●

While data clearing takes place, the
percentage of data cleared is displayed.

*1 Excluding direct fax transmission and manual fax transmission. The fax data is not

held in Flash memory and thus there is no need to clear it.

*2 The duration of the message display can be changed with the key operator program,

"MESSAGE TIME SETTING". (See page 11 of the key operator's guide.)

●

When printing a normal print job in printer mode, the image data is automatically cleared
from memory after printing is completed. However, when the job retention function is used
(see the online manual for network printer), the image data is retained in memory. The
retained image data can be cleared by selecting the hold data and then touching the
[DELETE] key.

●

If the machine power is turned off while image data is being cleared from memory or before
a job is finished, the data may not be completely cleared. If you wish to prevent this from
happening, use "CLEAR ALL MEMORY" in the key operator programs (page 4 of this
manual) to completely clear all data before turning off the power.

0666211221

PRINT JO

DATA IS BEING CLEARED.

DATA IS BEING CLEARED.

50.00%

01_Sec_AR-FR12.fm  2 ページ  ２００４年２月２６日　木曜日　午前１０時４９分