AR-F151 (serv.man11). AR150 155 ARF151 Service Manual-Simulation Fax Software Switch Trouble Codes - Sharp Copying Equipment Service Manual (repair manual). Page 9

Main code

Sub code

Content

43

04

Fusing temperature setup 2
(Operation/Procedure)
1. When this simulation is executed, the currently set code number is displayed.
2. Enter the code number and press the START key, and the setting will be changed.

05

Duplex mode fusing temperature setup
(Operation/Procedure)
1. When this simulation is executed, the currently set code number is displayed.
2. Enter the code number corresponding to the duplex and press the START key. The setting is changed
   accordingly.

∗ The above shift temperature set by this simulation is added to the fusing temperature of single copy.

09

Postcard size paper fusing control setup

46

01

Copy density adjustment
(Outline)
Used to adjust the copy density in each copy mode.(The copy density can be set by changing the set value of
ASIC GAMMA ADJUST register.)
Setting in each copy mode is performed at exposure level 3. When the copy density (exposure) is adjusted
arbitrarily, the max, and min. exposure levels are automatically calculated and set. (The change amounts
(gradient, change amount) at level 1 – 5 are predetermined.)
(Operation/Procedure)
1. When this simulation is executed, warming up and shading are performed and the current set value is
     displayed in two digits.
2. Press the copy mode select key to select each setting mode and setting display.
 

∗ The copy mode setting is indicated with the following lamps as shown below.

3. Change the setting with the value up-down key and press the START key, and a copy will be made with the
     entered set value.
4. Press the clear key to store the set value and exit the simulation.

Code number

Set temperature (˚C)

0

155

1

160

2

165

3

170 (

∗ Default)

4

175

5

180

Code number

Shift temperature (˚C)

0

±0˚C

1

–8˚C

2

–6˚C

3

–4˚C

4

–2˚C

5

±0˚C

6

+2˚C

7

+4˚C

8

+6˚C

9

+8˚C

Code number

Setup

0

Cancel (Default)

1

Setup

Copy mode

Display lamp

AE mode

AE mode lamp

TEXT mode

TEXT mode lamp

PHOTO mode

PHOTO mode lamp

TS mode (TEXT)

TEXT mode lamp & PHOTO mode lamp

TS mode (AE)

AE mode lamp & PHOTO mode lamp

AR-F151

9  –  8