Read Sharp AR-F14 (serv.man5) Service Manual online
AR-F14/PN1 DISASSEMBLY AND ASSEMBLY 5-6
(4)Removing the Saddle Unit
1) Remove the front cover. (See 1.A.(2).)
2) Remove the rear cover. (See 1.A.(3).)
3) Open the jam removal cover [1]; then, remove the two screws [2] and
3) Open the jam removal cover [1]; then, remove the two screws [2] and
the right stay [3].
Fig.F03-102-16
4) Turn the fold jam releasing dial assembly [4] to move the paper
retaining plate assembly [5] to the inside.
Fig.F03-102-17
5) Remove the stop ring [6], and detach the timing belt [7].
6) Disconnect the two connectors [8].
Fig.F03-102-18
7) Remove the three screws [9], and slide out the stapler unit [10]
slightly to the front.
8) Slide out the saddle unit [11] to the front.
Fig.F03-102-19
(5) Removing the Processing Tray Assembly
1) Remove the processing tray upper cover. (See 1.A.(5).)
2) Remove the side guide. (See 1.A.(7).)
3) Remove the two screws [1], and disconnect the five connectors [2].
3) Remove the two screws [1], and disconnect the five connectors [2].
Fig.F03-102-20
4) Pull the processing stopper base [3] to the front, and free the claw [5]
at the front and the claw [6] at the rear of the processing stopper [4].
Fig.F03-102-21
5) Disconnect the three connectors [7].
6) Release the two claws [8] of the harness retainer, and detach the
motor harness [9].
Fig.F03-102-22
[3]
[2]
[1]
[2]
[5]
[4]
[6]
[7]
[8]
[10]
[9]
[9]
[11]
[1]
[1]
[2]
[2]
[2]
[6]
[4]
[5]
[4]
[3]
[9]
[8]
[7]
[05]DISASSEMBLYANDASSEMBLY.fm 6 ページ ２００４年４月１９日 月曜日 午後１時３８分
Click on the first or last page to see other AR-F14 (serv.man5) service manuals if exist.