Read Sharp AR-F11 (serv.man7) Service Manual online
6-7
CHAPTER 6 MECHANICAL CONSTRUCTION
10. Removing the Grate-Shaped
Lower Guide
1) Remove the tray assembly.
2) Remove the five screws [1] (M4), and re-
2) Remove the five screws [1] (M4), and re-
move the front sub-support [2].
3) Remove the three screws [3] (M4).
4) Remove the three screws [4] (M3), and open
4) Remove the three screws [4] (M3), and open
the grate-shaped lower guide [5] to the front.
Figure 6-116
4) Free the harness [9] from the harness stop
[8].
5) Disconnect the two connectors [10], and re-
move the grate-shaped lower guide [7].
Figure 6-117
[3]
[4]
[6]
[5]
[2]
[1]
[8]
[10]
[9]
[7]
Caution:
To remove a sub-support, remove the front
sub-support [2]. The rear sub-support [6]
is adjustable. If the rear sub-support [6]
has been removed, be sure to adjust the rear
sub-support screw to the marking at which
it was set prior to the removal, or adjust
parallelism referring to "11. Installing the
Rear Sub-Support."
sub-support [2]. The rear sub-support [6]
is adjustable. If the rear sub-support [6]
has been removed, be sure to adjust the rear
sub-support screw to the marking at which
it was set prior to the removal, or adjust
parallelism referring to "11. Installing the
Rear Sub-Support."
Click on the first or last page to see other AR-F11 (serv.man7) service manuals if exist.