Read Sharp AR-F11 (serv.man7) Service Manual online
6-6
CHAPTER 6 MECHANICAL CONSTRUCTION
4) Disconnect the connector [1], and remove
the two screws [2].
Figure 6-113
[2]
[1]
5) Pull out the motor slightly, and remove the
parallel pin [1] and the motor.
Figure 6-114
[1]
Figure 6-115
9.
Removing the Grate-Shaped
Upper Guide
Upper Guide
1) Remove the slide guide [1] and end caps [2].
2) Release the tray lift motor gear clutch [6]
2) Release the tray lift motor gear clutch [6]
with a screwdriver or similar object while
supporting the tray assembly, and gently
lower the tray assembly down to its lowest
position.
supporting the tray assembly, and gently
lower the tray assembly down to its lowest
position.
3) Remove the five screws [3] (M4).
4) Remove the screw [4] (M3), and remove the
4) Remove the screw [4] (M3), and remove the
grate-shaped upper guide [5].
[1]
[5]
[3]
[4]
[6]
[2]
[2]
[3]
Click on the first or last page to see other AR-F11 (serv.man7) service manuals if exist.