Read Sharp AR-F11 (serv.man7) Service Manual online
6-5
CHAPTER 6 MECHANICAL CONSTRUCTION
7.
Removing the Tray 2 Unit
1) Remove the tray 1 unit.
2) Disconnect the two connectors [1] and
2) Disconnect the two connectors [1] and
grounding wire [2] and remove harness [3].
3) Lift the tray 2 unit to remove.
Figure 6-110
[1]
[2]
[3]
8.
Removing the Tray 1/2 Lift Motor
1) Remove the tray 1/2.
2) Remove two screws [1], and two lift blocks
2) Remove two screws [1], and two lift blocks
[2].
3) Remove the five screws [3], and remove the
tray from the tray unit.
Figure 6-111
[3]
[3]
[1]
[2]
[2]
3) Release the two harness stops [1].
Remove the four screws [2], and remove the
tray frame [3]. Release the claws [4] to re-
move.
tray frame [3]. Release the claws [4] to re-
move.
Figure 6-112
[2]
[3]
[2]
[4]
[4]
[1]
Click on the first or last page to see other AR-F11 (serv.man7) service manuals if exist.