Read Sharp AR-D28 (serv.man2) Service Manual online
AR-D28/D27/MU2
UNPACKING AND INSTALLATION
4 – 5
3) Connect the main unit of the printer to the multi purpose drawer.
<1>Attach the rear mounting plates using a supplied screw for each.
Caution: Insert the mounting plate under the desk frame.
<2>Pull out the paper tray of the multi purpose drawer until it stops and
attach the front mounting plates using a supplied screw for each.
Then, remove the lock of the paper tray and close the tray.
Then, remove the lock of the paper tray and close the tray.
<3>Reattach the paper tray of the main unit of the printer.
4) Remove the multi rear cabinet.
<1>Remove the two screws that secure the multi rear cabinet.
<2>Remove the two screws that secure the Harness protection sheet.
<3> Remove the filament tape that secure the the power supply I/F harness.
5) Connect the harness to the main unit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of
the printer and then slide the harness cover up to remove it.
Process the harness cover as shown in the illustration.
Process the harness cover as shown in the illustration.
<2>Connect the connector of the relay harness of the multi purpose
drawer to the connector of the PCU PWB of the main unit of the printer.
Rear mounting plate
Rear mounting plate
Screw
Screw
Tray frame
Mounting
plate
plate
Screw
Screw
Front mounting plate
Front
mounting plate
mounting plate
Multi rear cabinet
Screw
Screw
Harness cover
Screw
Cut out.
CN10
Connector
Click on the first or last page to see other AR-D28 (serv.man2) service manuals if exist.