AR-D14. Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 10

Read Sharp AR-D14 Service Manual online

AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-6
<2>Pull out the paper tray of the multi purpose drawer until it stops and 
attach the front mounting plates with two supplied screws.
Then, remove the lock of the paper tray and close the tray.
<3>Reattach the paper tray of the main unit of the printer.
4) Connect the harness to the main unit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of the 
printer and then slide the harness cover up to remove it.
Process the harness cover as shown in the illustration.
<2>Connect the connector of the relay harness of the multi purpose 
drawer to the connector of the PCU PWB of the main unit of the 
printer.
If you do not install a finisher, saddle stitch finisher or mail-bin stacker,
the steps below are not needed. Proceed to step 10).
5) Remove the rear cabinet of the multi purpose drawer.
<1>Remove the two screws that fix the rear cabinet of the multi purpose 
drawer and then remove the rear cabinet.
<2>Remove the screw that fixes the AC inlet cover and then remove the 
AC inlet cover.
Process the AC inlet cover as shown in the illustration.
6) Attach the power supply unit.
Attach the power supply unit to the positioning portion of the multi
purpose drawer and then fix it with three supplied screws.
7) Connect the power supply unit harness to the PCU PWB of the main
unit of the printer.
Connect the power supply harness connector to CN11 (red
connector) of the PCU PWB of the main unit of the printer.
Screw
Screw
Front mounting plate
 Front
 mounting plate
 Harness cover
Cut out.
Screw
Connector
 Rear cabinet
Screw
Screw
AC inlet cover
Cut out.
Optional power supply unit
Screws
Screws
CN11
Connector

Display

Click on the first or last page to see other AR-D14 service manuals if exist.

Random: