Read Sharp AR-D14 Service Manual online
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-7
8) Attach the rear cabinet of the paper tray.
<1>Pass the AC cord of the power supply unit as shown in the illustration
<1>Pass the AC cord of the power supply unit as shown in the illustration
and attach the rear cabinet with two screws.
<2>Attach the AC inlet cover to the paper tray and fix it with the removed
screw.
9) Connect the AC cord of the power supply unit to the main unit of the
printer.
Connect the AC cord of the power supply unit to the inlet connector
of the main unit of the printer at the location shown in the illustration.
of the main unit of the printer at the location shown in the illustration.
Then, proceed to step 11).
10) Attach the harness cover.
Reattach the harness cover to its original position and fix it with the
removed screw.
At this time, ensure that the power supply unit harness is arranged
At this time, ensure that the power supply unit harness is arranged
as shown in the illustration.
•Fix the harness securely to the wire saddle.
11) Adjust the position of the paper guides of the paper tray.
Refer to "Setting and adjustment" described later.
4.AR-DC1
<Before installation>
•Start installation after checking that the DATA indicator on the operation
panel is not lit or blinking.
1) Turn the main switch of the printer to "OFF".
Turn the main switch located on the front of the printer to "OFF".
Then, remove the power plug of the printer from the outlet.
2) Remove the multi rear cabinet.
Remove the two screws that secure the multi rear cabinet and
remove the multi rear cabinet.
remove the multi rear cabinet.
3) Remove the AC inlet cover from the multi rear cabinet.
Remove the screw that secures the AC inlet cover and remove the
AC inlet cover.
Work the AC inlet cover as shown in the illustration.
Work the AC inlet cover as shown in the illustration.
Rear cabinet
Screw
Screw
AC cord
Screw
AC inlet cover
AC cord
Wire saddle
Harness cover
Screw
Optional power
supply harnesses
supply harnesses
Wire saddle
Parts included
Screws (3)
ACCESSORY
I.T.E.
9K11
9K11
"OFF"
Multi rear cabinet
Screw
Screw
AC inlet cover
Cut-out
Click on the first or last page to see other AR-D14 service manuals if exist.