Read Sharp AR-D14 Service Manual online
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-1
[4] UNPACKING AND INSTALLATION
1.AR-D13
<Before installation>
•For installation, a power supply unit (AR-DC1) is needed.
1) Turn off the main switch of the main unit of the printer.
Turn the main switch located on the front side of the printer to the
"OFF" position.
Then remove the power plug from the outlet.
Then remove the power plug from the outlet.
2) Attach the adjusters and adjust them.
<1>Insert the left adjusters to the stand/paper drawer.
<2>Turn the five adjusters to lower them until they touch the floor.
<3>Attach the four adjuster covers.
<3>Attach the four adjuster covers.
3) Put the main unit of the printer on the stand/paper drawer.
<1>Pull out the paper tray of the main unit until it stops and then remove
it by lifting both ends of the tray.
<2>Hold the main unit of the printer at the positions shown in the
illustration and put the main unit on the stand/paper drawer so that
the front side and the left side of the main unit are aligned to those of
the stand/paper drawer.
4) Connect the main unit to the stand/paper drawer.
<1>Attach the rear mounting plates with two supplied screws.
<1>Attach the rear mounting plates with two supplied screws.
<2>Pull out the upper paper tray of the stand/paper drawer until it stops
and attach the front mounting plates with two supplied screws.
Then, remove the lock of the paper tray and close the tray.
Then, remove the lock of the paper tray and close the tray.
<3>Reattach the paper tray of the main unit.
<Parts included>
Left adjuster: 1 pc.
Front mounting
plates: 2 pcs.
plates: 2 pcs.
Rear mounting
plates: 2 pcs.
plates: 2 pcs.
Adjuster covers: 4 pcs.
Screws: 4 pcs.
Left paper guides: 2 pcs.
Right paper guides: 2 pcs.
"OFF"
3
3
3
2
2
2
2
1
3
Front side
Rear side
Rear mounting plate
Rear
mounting plate
mounting plate
Screw
Screw
Screw
Screw
Front
mounting plate
mounting plate
Front mounting
plate
plate
Click on the first or last page to see other AR-D14 service manuals if exist.