AR-C270 (serv.man15). (Section 11) Maintenance Disassembly Assembly - Sharp Copying Equipment Service Manual (repair manual). Page 31

1) Remove the connector, and remove the paper entry detector

(S07/Ua01/P20).

∗

Clean the detector.

Clean and remove oil attached on the external surfaces.

Clean the oil filter attached to the oil pump suction port with waste
cloth.
If the oil filter is clogged, oil is not sufficiently supplied to the heat
roller, causing a trouble. 

•

When installing (replacing) this pump, set the pump operation
value of Sim 43-7 referring to the marking color shown in the illus-
tration below.

1) Remove the screw and the connector, and remove the paper exit

unit (S07/Ua02).

1) Remove the paper exit unit.  S07/Ua02 

2) Remove the connector, and remove the paper exit detector

(S07/Ua02/P01/CLN).

∗

Clean it.

1) Remove the paper exit unit.  S07/Ua02 

2) Remove the screw, and remove the paper exit roller unit.

S07/Ua01/P20/CLN

S06/Ua06/P24

Marking

S07/Ua02/P01/CLN

11 –  31