AR-C270 (serv.man15). (Section 11) Maintenance Disassembly Assembly - Sharp Copying Equipment Service Manual (repair manual). Page 26

2) Remove the connector, and remove the duplex paper exit detector

(S07/Ua01/P02/CLN).

∗

Clean the detector.

1) Remove the fusing upper cover.
2) Remove the screw, the washer, and the connector.
3) Remove the screw and the connector, and remove the fusing front

paper guide unit.

Fusing front paper guide installing position:
Install so that the line mark of the fusing front paper guide comes
at the center of the mark on the fusing unit.

4) Remove the detection Thermistor (lower) (S07/Ua01/P03/CLN).

∗

Clean with alcohol.

5) Remove the Thermistor pair (lower) (S07/Ua01/P03/CLN).

∗

Clean with alcohol.

(Note) Fix the thermistor so that the thermistor harness is way from

the drive section (gear).

1) Remove the fusing upper cover.
2) Remove the screw and the connector, and remove the thermostat

(upper) (S07/Ua01/P04).

3) Remove the fusing front paper guide unit.
4) Remove the screw and the connector, and remove the thermostat

(lower) (S07/Ua01/P04).

1) Open the paper exit/transport mechanism.
2) Remove the screw, and remove the upper cleaning roller unit.

S07/Ua01/P03/CLN

S07/Ua01/P04

11 –  26