Read Sharp AR-C270 (serv.man13) Service Manual online
B. Simulation list
(1) Main/Sub
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
1
1
Used to check the operations of the scanner
unit and its control circuit.
unit and its control circuit.
Operation test/check
Optical (Image scanning)
Operation
2
Used to check the sensors and detectors in
the scanner section and the related circuits.
the scanner section and the related circuits.
Operation test/check
Optical (Image scanning)
Operation
2
1
Used to check the operations of the RADF
unit and the control circuit. (The document
feed operation is repeatedly performed.)
(AR-C150/C250/C160/C270)
unit and the control circuit. (The document
feed operation is repeatedly performed.)
(AR-C150/C250/C160/C270)
Operation test/check
ADF/RADF/UDH/SPF
Operation
2
Used to check the operations of the sensors
and detectors in the RADF unit and the
related circuits. (AR-C150/C250)
and detectors in the RADF unit and the
related circuits. (AR-C150/C250)
Operation test/check
ADF/RADF/UDH/SPF
Operation
3
Used to check the operations of the loads in
the RADF unit and the related circuits.
(AR-C150/C250/C160/C270)
the RADF unit and the related circuits.
(AR-C150/C250/C160/C270)
Operation test/check
ADF/RADF/UDH/SPF
Operation
3
2
Used to check the operations of the loads in
the sorter/finisher and the related circuits.
(AR-C150/C250/C160/C270)
the sorter/finisher and the related circuits.
(AR-C150/C250/C160/C270)
Operation test/check
Sorter/Finisher
Operation
3
Used to check the operations of the loads in
the sorter/finisher and the related circuits.
(AR-C150/C250/C160/C270)
the sorter/finisher and the related circuits.
(AR-C150/C250/C160/C270)
Operation test/check
Sorter/Finisher
Operation
4
2
Used to check the operations of the sensors
and detectors in the large capacity tray and
the related circuit.
(AR-C150/C250/C160/C270)
and detectors in the large capacity tray and
the related circuit.
(AR-C150/C250/C160/C270)
Operation test/check
Paper transport
Operation
3
Used to check the operations of the loads in
the large capacity tray and the control circuit.
(AR-C150/C250/C160/C270)
the large capacity tray and the control circuit.
(AR-C150/C250/C160/C270)
Operation test/check
Paper transport
Operation
5
1
Used to check the operations of the
operation panel display lamps and LCD and
the control circuit.
operation panel display lamps and LCD and
the control circuit.
Operation test/check
Operation (Display/
Operation key)
Operation key)
Operation
2
Used to check the operations of the heater
lamp and the control circuit.
lamp and the control circuit.
Operation test/check
Fixing (Fusing)
Operation
3
Used to check the operations of the scanner
lamp and the control circuit.
lamp and the control circuit.
Operation test/check
Optical (Image scanning)
Operation
4
Used to check the operations of the
discharge lamp and the control circuit.
discharge lamp and the control circuit.
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
Others
Operation
6
1
Used to check the operations of the loads
(clutches and solenoids) in the paper
transport system and the control circuits.
(clutches and solenoids) in the paper
transport system and the control circuits.
Operation test/check
Paper transport
(Discharge/Switchback/
Transport)
(Discharge/Switchback/
Transport)
Operation
2
Used to check the operation of each fan
motor and its control circuit.
motor and its control circuit.
Operation test/check
Others
Operation
7
1
Used to set the aging conditions.
Setting/
Operation test/check
Operation test/check
Operation
6
Used to set the intermittent aging cycle.
Setting/
Operation test/check
Operation test/check
Operation
8
Used to set Yes/No of warm-up time display.
Setting/
Operation test/check
Operation test/check
Operation
9
Used to check the operation of each color
image quality.
image quality.
Operation test/check
Others
Picture quality
8
1
Used to check and adjust the operation of
each print mode developing bias voltage and
the control circuit.
each print mode developing bias voltage and
the control circuit.
Adjustment/
Operation test/check
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
2
Used to check and adjust the operation of
each print mode main charger grid voltage
and the control circuit.
each print mode main charger grid voltage
and the control circuit.
Adjustment/
Operation test/check
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
6
Used to check and adjust the operation of
the transfer charger current and the control
circuit. (Old)
the transfer charger current and the control
circuit. (Old)
Adjustment/
Operation test/check
Operation test/check
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
Copy
9
1
Used to check the operation of the loads
(clutches and solenoids) in the duplex
section and the control circuit.
(AR-C150/C250/C160/C270)
(clutches and solenoids) in the duplex
section and the control circuit.
(AR-C150/C250/C160/C270)
Operation test/check
Duplex
Operation
2
Used to check the operation of the sensors
and detectors in the duplex section and the
control circuit. (AR-C150/C250/C160/C270)
and detectors in the duplex section and the
control circuit. (AR-C150/C250/C160/C270)
Operation test/check
Duplex
Operation
8 – 3
Click on the first or last page to see other AR-C270 (serv.man13) service manuals if exist.