Read Sharp AR-C260 (serv.man10) Service Manual online
AR-C260/C260M DESCRIPTIONS OF EACH SECTION 7 - 12
5) Remove the connector, and remove the process control sensor.
Cleaning: Clean the sensor surface.
d. PWB
1) Remove the transfer unit from the machine.
2) Remove the connector and the screw, and remove the belt drive
unit.
3) Remove the spring from the hook section.
4) Remove the process control shutter.
5) Remove the connector (A).
6) Remove the connector (B) and the screw, and remove the PWB.
e. Waste toner tank unit
1) Remove the transfer unit from the machine.
2) Remove the connectors and the screws, and remove the belt drive
unit.
3) Remove the waste toner tank unit.
Note for assembly:
Insert the notches A and B of the waste toner tank unit into the posi-
tions in the transfer frame indicated in the figure below.
tions in the transfer frame indicated in the figure below.
f. Transfer belt
1) Remove the transfer unit from the machine.
2) Remove the connector and the screw, and remove the belt drive
unit.
3) Remove the lower screw.
Note: If the upper screw is removed and folded, the electrode is
deformed. Therefore, be sure to remove the lower screw.
A
B
B
A
Front
Rear
Click on the first or last page to see other AR-C260 (serv.man10) service manuals if exist.