AR-C170 (serv.man50). Managing the machine - Sharp Copying Equipment User Guide / Operation Manual. Page 18

When a misfeed has occurred during printing, the message "MISFEED HAS OCCURRED." will appear in the touch
panel display of the operation panel and printing output will stop. The approximate locations of possible misfeeds are
indicated by "

" in the illustration below. The page numbers for detailed information for misfeed removal for each

are also shown.

Misfeed removal guidance can be displayed by touching the [INFORMATION] key on the touch panel after a misfeed
has occurred.

NOTE
Received faxes are all temporarily stored in memory. If a paper misfeed occurs, received faxes cannot be printed.
When the misfeed is removed, the received faxes will print out automatically.

NOTES
● Be careful not to tear

the misfed paper
during removal.

● If paper is accidentally

torn during removal,
be sure to remove all
pieces.

● Take care not to

damage or leave
fingerprints on the
transfer belt when
removing the misfed
paper.

Misfeed in the fusing area,

and exit area (page 2-20)

Misfeed in the duplex 
bypass/inverter unit
(page 2-22)

Misfeed in the saddle 
stitch finisher (page 3-10)

Misfeed in the reversing
single pass feeder
(see page 7-2 in the "Copy 
Functions" section)

Misfeed in the transport 
area (page 2-20)

Misfeed in the bypass tray
(page 2-19)

Misfeed in the duplex 
module/2 x 500 sheet 
paper drawer (page 2-22)

Misfeed in the stand/1 x 500 
sheet paper drawer or the 
stand/3 x 500 sheet paper 
drawer
 (page 2-21)

Misfeed in the large 
capacity tray 
(page 3-22)

Misfeed in the 500 sheet 
paper drawer
(page 2-19)

Misfeed in the 20-bin  
sorter (page 3-19)

The fusing unit is hot. Take care in removing paper.

Upper fusing unit

Fusing unit paper guide

Transfer belt

INFORMATION

Apollon_general-copy_EX.book  18 ページ  ２００４年６月７日　月曜日　午後１時５９分