Read Sharp AR-C170 (serv.man26) Service Manual online
AR-C170M SIMULATION 9 - 4
9
3
Used to check the operations of the
loads (motor, clutch, solenoid) in the
inverter/duplex section and the
control circuits.
loads (motor, clutch, solenoid) in the
inverter/duplex section and the
control circuits.
Operation test/check
Inverter/Duplex
Operation
14
0
Used to cancel self diag troubles H3,
H4, and H5. Inhibition of the color
copy mode operation is canceled.
H4, and H5. Inhibition of the color
copy mode operation is canceled.
Clear/cancel (Trouble
etc.)
etc.)
Trouble
Error
15
0
Self diag U6-09 (large capacity
paper feed tray) trouble cancel
paper feed tray) trouble cancel
Clear/cancel (Trouble
etc.)
etc.)
Paper feed
Trouble
16
0
Used to cancel self diag trouble U2.
Clear/cancel (Trouble
etc.)
etc.)
Trouble
Error
17
0
Used to cancel self diag troubles PF
(copy inhibition command from the
host computer).
(copy inhibition command from the
host computer).
Clear/cancel (Trouble
etc.)
etc.)
Communication (RIC/
MODEM)
MODEM)
Trouble
Error
21
1
Used to set the maintenance cycle.
Setting
Specifications
Counter
22
1
Used to check the print count value
in each section and each operation
mode. (Used to check the
maintenance timing.)
in each section and each operation
mode. (Used to check the
maintenance timing.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Counter
2
Used to check the total misfeed
count and the total trouble count. (If
the misfeed count is considerably
great, it may be judged as necessary
to repair. By dividing this count by
the total count, the misfeed rate can
be obtained.)
count and the total trouble count. (If
the misfeed count is considerably
great, it may be judged as necessary
to repair. By dividing this count by
the total count, the misfeed rate can
be obtained.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Trouble
3
Used to check misfeed positions and
the misfeed count of each position.
(If the misfeed count is considerably
great, it may be judged as necessary
to repair.) (Machine section only)
the misfeed count of each position.
(If the misfeed count is considerably
great, it may be judged as necessary
to repair.) (Machine section only)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Trouble
Misfeed
4
Used to check the total trouble (self
diag) history.
diag) history.
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Trouble
5
Used to check the ROM version of
each unit (section).
each unit (section).
Others
Software
6
Used to print the setting and
adjustment data list.
adjustment data list.
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Data
Setting/
Adjustment data
Adjustment data
7
Used to display the key operator
code. (Used when the customer
forgets the key operator code.)
code. (Used when the customer
forgets the key operator code.)
User data output/
Check (Display/Print)
Check (Display/Print)
Data
User data
8
Used to check the number of scan
(read) of the staple and the
document feed unit.
(read) of the staple and the
document feed unit.
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Counter
9
Used to check the number of uses
(print quantity) of each paper feed
section.
(print quantity) of each paper feed
section.
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Paper feed
Counter
10
Used to check the system
configuration (option, internal
hardware).
configuration (option, internal
hardware).
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Specifications
Option
11
Used to check the number of use of
FAX. (When the FAX is installed)
FAX. (When the FAX is installed)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
FAX
Counter
12
Used to check the misfeed positions
and the number (history) of misfeed
at each position. (If the misfeed
count is considerably great, it may
be judged as necessary to repair.)
and the number (history) of misfeed
at each position. (If the misfeed
count is considerably great, it may
be judged as necessary to repair.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Automatic document
feeder
feeder
Trouble
Misfeed
13
Used to check the process cartridge
counter. (If the count number is
considerably great, it may be judged
as necessary for repair.)
counter. (If the count number is
considerably great, it may be judged
as necessary for repair.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Process section
Counter
19
Used to check the counters related
to the network scanner.
to the network scanner.
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Network scanner
Counter
24
1
Used to clear the misfeed counter,
the misfeed history, the trouble
counter, and the trouble history.
(After completion of maintenance,
the counters are cleared.)
the misfeed history, the trouble
counter, and the trouble history.
(After completion of maintenance,
the counters are cleared.)
Data clear
Memory
Counter
2
Used to clear the data of the number
of uses (print quantity) of each paper
feed section.
of uses (print quantity) of each paper
feed section.
Data clear
Paper feed
Counter
Paper feed unit
3
Used to clear the number of scan
(read) of the staple and the
document feed unit.
(read) of the staple and the
document feed unit.
Data clear
Transport/Finisher
Counter
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.