AR-505 (serv.man9). AR505 Service Manual-Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 50

Item

Data

Program

Operation/
Procedure

1. Enter SIM 67-13 mode and wait until "--------" display

is changed to "READY."

2. Send data from PC.

1) The display of the item to be rewritten is changed in the se-

quence of "RECEIVE," "SUM," "VERIFY" and checking is
performed.

2) The result of checking is displayed with "OK" or "NG."

(Note) In case of an error, "ERROR!!! Exit sub Menu" is

displayed.
In that case, press the interrupt key to exit from SIM
67-13 mode. If the machine still waits for date from
PC, stop data sending.

Purpose

Data transfer/Copy

Function
(Purpose)

Used to check the printer flash memory data writing
and its result.

Section

Printer

Item

Data

Program

Operation/
Procedure

1. With the power OFF, change the printer PWB

jumper connection to allow writing into the flash
memory.

2. Enter SIM 67-14 mode, and wait until "--------" display is

changed to "READY."

3. Send data from PC.

1) The display of the item to be rewritten is changed in the se-

quence of "RECEIVE," "SUM," "ERASE," "BLANK," and
"WRITE" and rewriting is performed.

2) The result of rewriting is displayed with "OK" or "NG."

(Note) In case of an error, "ERROR!!! Exit sub Menu" is

displayed.
In that case, press the interrupt key to exit from SIM
67-14 mode. If the machine still waits for date from
PC, stop data sending.

4. Change the jumper connection of the printer PWB again to dis-

able writing to the flash memory.

Purpose

Operation test/check

Function
(Purpose)

Used to check the sum of the printer flash memory.

Section

Printer

Item

Data

Program

Operation/
Procedure

1. When the simulation is executed, flash memory sum

check is started.

2. For all the items to be checked, "--------" is changed to

"CHECKING." When checking is completed, the sum check re-
sult is displayed with "OK" or "NG."
(In case of "NG" with PS KANJI font, the sum number is also
displayed as "SUM2 NG" because there are four sums.

Since no KANJI font is available for ARPB2 (for EX), "PS KANJI
FONT" and "ESC/P KANJI FONT" are terminated with "--------."

Purpose

Operation test/check

Function
(Purpose)

Used to check the operation of the network card.

Section

Printer

Item

Operation

Interface/Communication

Operation/
Procedure

1. When SIM 67-16 menu is displayed, the operation

check of the network card of the printer section is
started.

2. When checking is completed, the result is displayed with "OK"

or "NG."

Purpose

Data clear

Function
(Purpose)

Used to clear data in the NVRAM of the printer PWB
(set to the default). (Printer set data)

Section

Printer

Item

Data

Operation/
Procedure

1. To clear set data of the printer section, press the

[EXECUTE] key.

2. Confirmation is displayed whether to clear NVRAM or not.

YES: Clear

NO:

Not clear

3. During execution of clearing NVRAM, "NOW DOING..." is dis-

played.

AR-505

7 – 49

8/6/1999