Read Sharp AR-505 (serv.man9) Service Manual online
D:
Picture quality mode
4.ALL 1BY2(H)
1: Auto
5.ALL 1BY3(V)
2: Character
6.ALL 1BY3(H)
3: Character/Photo
7.ALL 1BY4(V)
4: Photo
8.ALL 1BY4(H)
E:
Paper feed source
select
select
9.ALL 1BY5(V)
1: Manual
10.ALL 1BY5(H)
2: Upper cassette
11.ALL 2BY2(V)
3: Lower cassette
12.ALL 2BY2(H)
4: Desk top cassette
13.ALL 2BY3(V)
5: Desk middle cassette
14.ALL 2BY3(H)
6: Desk bottom cassette
15.BLACK *1
7: LCC
16.GRAY SCALE 120/4(V) *3 *4
F:
Duplex print select
17.GRAY SCALE 120/4(H) *2 *4
0: Single
18.GRAY SCALE 250/8(V) *2
1: Duplex
19.GRAY SCALE 250/8(H) *2
20.DOT PATTERN 250/2(V) *1
21.GRAY SCALE 250/2(H) *3 *4
22.SQUARE
23.SLANT 45
24.SLANT 26.6
25.SLANT 63.4
26.ID/BG
27.DOT PATTERN 12.5%
28.DOT PATTERN 25%
29.DOT PATTERN 50%
30.SMOOTHING CHECK
PATTERN
PATTERN
*1: In AR-2X1/3X1/4XX/250/XX6 series, only Japan specification
model allows density change.
*2: In AR-2X1/3X1/4XX/250/XX6 series, only Japan specification
model works.
*3: AR-2X1/3X1/4XX/250/XX6 series cannot work.
*4: AR-501/505 cannot work.
65
65 - 1
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the touch panel (LCD display) detecting
position.
position.
Section
Operation (Display/Operation key)
Operation/
Procedure
Procedure
Touch the four cross marks.
The coordinates at the pressed point are set.
The coordinates at the pressed point are set.
When the coordinates are properly set, the display turns to gray
and returns to the simulation sub code entry screen.
In case of an abnormality, it returns to the input display.
and returns to the simulation sub code entry screen.
In case of an abnormality, it returns to the input display.
65 - 2
Purpose
Operation data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to check the result of the touch panel (LCD dis-
play) detecting position adjustment. (The coordinates
are displayed.)
play) detecting position adjustment. (The coordinates
are displayed.)
Section
Operation (Display/Operation key)
Operation/
Procedure
Procedure
When the touch panel is pressed, the AD value in each
of X and Y directions at that point and the coordinate
values are displayed in ( ) as well as the coordinate val-
ues of each point.
It is based on the coordinates set with SIM 65-1.
of X and Y directions at that point and the coordinate
values are displayed in ( ) as well as the coordinate val-
ues of each point.
It is based on the coordinates set with SIM 65-1.
67
67 - 1
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the printer PWB memory operation
(read/write). (When replacing the PWB with a new one,
this check must be performed.)
(read/write). (When replacing the PWB with a new one,
this check must be performed.)
Section
Printer
Item
Data
Operation/
Procedure
Procedure
1. When SIM 67-1 menu is displayed, the operation
check of all memory (DRAM, SIMM1, SIMM2) of the
printer section is started.
printer section is started.
2. For the RAM the operation check of which is started, "--------"
display is changed to "CHECKING." When checking is com-
pleted, the check result is displayed with "OK" or "NG."
When SIMM is inserted, the memory capacity is also displayed
as "OK(16MB)."
pleted, the check result is displayed with "OK" or "NG."
When SIMM is inserted, the memory capacity is also displayed
as "OK(16MB)."
AR-505
7 – 47
8/6/1999
Click on the first or last page to see other AR-505 (serv.man9) service manuals if exist.