AR-505 (serv.man9). AR505 Service Manual-Simulation - Sharp Copying Equipment Service Manual (repair manual). Page 47

Purpose

Operation test/check

Function
(Purpose)

Used to check the operation (read/write) of the hard
disk. (Target models: AR-250/280/285/335)(Models
with the hard disk installed only.) (Partial check) 

Section

Memory

Item

Operation

Operation/
Procedure

1. Press the [EXECUTE] key to start the read/write op-

eration check.

2. After completion of the read/write operation check, the result is

displayed with OK or NG.
If NG is displayed, it means a hard disk trouble.

Purpose

Operation test/check

Function
(Purpose)

Used to check the operation (read/write) of the hard
disk.  (Target models: AR-250/280/285/335) (Only the
models with a hard disk) (All area check) 

Section

Memory

Item

Operation

Operation/
Procedure

1. Press the [EXECUTE] key to start the read/write op-

eration check.

2. After completion of the read/write operation check, the result is

displayed with OK or NG.
If NG is displayed, it means a hard disk trouble.

Purpose

Operation data output/Check (Display/Print)

Function
(Purpose)

Used to check the result of shading correction. (The
shading correction data are displayed.)

Section

Scanner (Exposure)

Item

Operation

Operation/
Procedure

Used to display the result of latest shading correction.
The displayed page can be shifted with [

­

], [

¯

] keys.

ODD/EVEN OFFSET: Difference between the average detection

level and the max. detection level

BLACK OFFSET:

Dark component (average level)

Purpose

Adjustment

Function
(Purpose)

Used to adjust the white plate scanning start position in
the shading white correction. (AR-501/505 only)

Section

Scanner

Item

Operation

Operation/
Procedure

1. When this simulation is executed, the currently set

value is displayed.
At that time, the set value can be changed with the
10-key.

2. When the OK key is pressed, the currently set value is stored

in the EEPROM.

Purpose

Operation test/check

Function
(Purpose)

Used to check the operation of the printer function
(auto print operation). (Print pattern, paper feed mode,
print mode, the number of sheets, and the density can
be set to an arbitrary value.)

Section

Printer

Item

Operation

Operation/
Procedure

1. Select the item with [

­

], [

¯

] keys.

2. Enter the print conditions with the 10-key. (There are

29 kinds of print patterns.)

3. Press the [EXECUTE] Key.

Printing is executed under the condition set with procedure 2.

A:

Self print pattern

-------- 1.ALL 1BY1(V)

B:

Density level

2.ALL 1BY1(H)

C:

Self print number
setting

3.ALL 1BY2(V)

AR-505

8/6/1999

7 – 46