AR-5040 (serv.man34). 002-Changes and Additions of Parts. - Sharp Copying Equipment Technical Bulletin (repair manual). Page 7

Read Sharp AR-5040 (serv.man34) Technical Bulletin online

Ref.
No.
Model
name
Version
P/G No.
Current parts
New parts
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
Parts code
Parts code
Price 
rank
(9)
AR-5040
All
9 -9
XBBSD40P12000
XBBSD40P14000
AA
Screw(M4X14)
1st lot
’94/10
3
Q’ty:  6
(10)
200V
series
51
—
PGSK-0006FCZZ
AV
Gasket
6
50
QCNW-0138FCZZ
AN
Mesh wire
(11)
All
54
PSHEP3852FCZZ
AC
FIN paper
discharge sheets
1st lot
Q’ty: 2
(12)
200V
series
55
RCORF1013LCZZ
AN
Ferrite core
1st lot
’95/4
(13)
SUK
only
1
TCAUS0003GCZZ
AB
Laser warning
label
1st lot
’95/4
Q’ty: 3
48
51
(14)
74
TCADZ1216FCZZ
AP
operation
manual
1st lot
’95/2
(15)
All
35
CBOX-0100FC31
BT
Shield box unit
1st lot
’95/5
35 -12
TLAB-4681CCZZ
(Discontinuance)
—
Grounding mark
label
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of 
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with “     ” is important for maintaining the safety of the set. Be sure to replace these parts with
 
specified ones for maintaining the safety and performance of the set.
!
Sharp Electronics (UK) Ltd, Copier Technical Support, Technical Service Group
Model:  AR-5040
Bulletin number:  AR5040-002
Page: 7 of 7 
Page of 7
Display

Download Sharp AR-5040 (serv.man34) Technical Bulletin

Found More:

AR-5040 (serv.man34) Service Manuals

Preview DownloadPagesSize
AR-5040 (serv.man27) 009-1 Measure to Alleviate Problems of Diagonal Feeding from the Upper Paper Cassette. 2 Change in the Manual Paper Feeding Lever in the Manual Multi Paper Feeding Unit as a Measure to Improve Productivity. Technical Bulletin 2 27.35 KB
AR-5040 (serv.man19) 017-To Prevent Damage to the CCD Harness (PREVIOUSLY SENT OUT AS FF COP 022) Technical Bulletin 2 48.72 KB
AR-5040 (serv.man20) 016-Modification for the Finisher Tray Bounce Problem (PREVIOUSLY SENT OUT AS FF COP 016) Technical Bulletin 3 150.83 KB
AR-5040 (serv.man21) 015-Change in Copier Transportation Method (PREVIOUSLY SENT OUT AS FF COP 012) Technical Bulletin 1 8.74 KB
AR-5040 (serv.man22) 014-Copier Hotline Telephone Number Change (PREVIOUSLY SENT OUT AS FF COP 002) Technical Bulletin 1 10.3 KB
AR-5040 (serv.man23) 013-Measure to Alleviate Problems of Upward and Downward Movement of the Finisher Tray. Technical Bulletin 2 49.38 KB
AR-5040 (serv.man24) 012-Change in Castors Carried Out as a Measure to Improve Productivity. Technical Bulletin 1 17.42 KB
AR-5040 (serv.man25) 011-Change in ROM Version of Model AR5040 Technical Bulletin 2 33.03 KB
AR-5040 (serv.man26) 010-Change in the Original Copy Detection Sheild of the Optical Unit Carried out as a Measure to Improve Productivity. Technical Bulletin 1 18.68 KB
AR-5040 (serv.man2) Change to the paper feed roller material. Technical Bulletin 13 1.22 MB
AR-5040 (serv.man28) 008-Change in the Roller Frame Unit in the Finisher Elevator Frame Unit. Technical Bulletin 2 27.46 KB
AR-5040 (serv.man29) 007-The Addition of a Separator Pawl Spacer to the Drum Cleaner Unit. Technical Bulletin 2 31.54 KB
AR-5040 (serv.man30) 006-Changes and Additions to Parts. Technical Bulletin 1 15.02 KB
AR-5040 (serv.man31) 005-Regarding 500 Cassette Paper Feeding Unit use and the Period for Changing the Rollers. Technical Bulletin 3 79.69 KB
AR-5040 (serv.man32) 004-Changes and Additions of Parts. Technical Bulletin 1 18.16 KB
AR-5040 (serv.man33) 003-Changes and Additions of Parts. Technical Bulletin 3 51.11 KB
AR-5040 (serv.man35) 001-1 Standardizationof the Parts Codes for the IC in the ICU PWB. 2 Prevention of Noise in the Sheild Box. 3 Correction of the Parts Guide. 4 Discontinuance of the Sheild Mylar in the Sheild Box Unit to Improve Productivity. 5 Prevention of Unclean Copies Due to the Curling of the Rear End of the Copy Paper During Double Side Copy Operations. 6 Improvement of Pusher Operations in the Finisher Unit. Technical Bulletin 5 377.95 KB
AR-5040 (serv.man17) 019-New Systems Support Team Systems Support Hotline (PREVIOUSLY SENT OUT AS FF COP 064) Technical Bulletin 1 9.96 KB
AR-5040 (serv.man3) Change of parts (variable resistor) Technical Bulletin 1 6.96 KB
AR-5040 (serv.man4) Establishment of the CG reverse roller shaft UN and the Reverse roller shaft UN in the 550 paper feeding unit as service parts Technical Bulletin 2 52.22 KB
AR-5040 (serv.man5) Supply of paper feeding roller rubbers as separate service packages. (WHITE) Technical Bulletin 1 74.93 KB
AR-5040 (serv.man6) Change In The Magnetic Clutch Of Paper Feeding Unit In The 500 Tray To Improve Productivity. (WHITE) Technical Bulletin 2 103.1 KB
AR-5040 (serv.man7) 1.Change In The Material Used For The Attachment Plate Of The guide Switch In The Transport Unit Carried Out As A Measure To Improve Productivity. 2.Change In The Material Of The Lower Guide Of The 500 Tray Paper Feeding Unit Carried Out As A Measure To Improve Productivity. 3.Change In The Shape Of The ADU Of The Roller Arm Carried Out As A Measure To Improve Productivity. (WHITE) Technical Bulletin 3 79.15 KB
AR-5040 (serv.man8) 1.Change In The Screws In The Optical Unit Carried Out As A Measure To Improve Productivity. 2.Measure To Alleviate Problems Of Oil Oozing From The Bushing In The Developing Unit. 3.Addition Carried Out Of An ICU Cover Sheet. 4.Measure To Improve Operation Stability Of The Shutter In The Toner Box. 5.Change Carried Out In The Maker Carried Out As A Measure To Improve Productivity. (WHITE) Technical Bulletin 3 93.37 KB
AR-5040 (serv.man9) Parts Interchangeability - 500 Sheet Tray Feed Unit. (WHITE) Technical Bulletin 4 108.66 KB
AR-5040 (serv.man10) 1.Change Carried Out In The Parts Used In The Tray Drawer Unit. 2.Change Carried Out In The Parts Used In The Tray Assembly Drawer Unit. 3.Change Carried Out In THe Parts Used In The ADU Unit. (WHITE) Technical Bulletin 4 108.99 KB
AR-5040 (serv.man11) 1.Measure To Stabilise The Return Of The PPD1 Actuator. 2.Measure To Alleviate Problems Of Diagonal Feeding Of The Original Documents In The ADF. 3.Change In The Attachment Screws Of The Fan Attachment Base Plate Carried Out As A Measure To Improve Operation. 4.Change In The Part Code Carried Out In Accordance With A Change In The Maker (Action Carried Out As A Measure To Improve Productivity). (WHITE) Technical Bulletin 3 62.17 KB
AR-5040 (serv.man12) 1.Change Carried Out In The Printed Content Of The MSDS Card. 2.Measure To Prevent Chafing Of The Copy Paper. 3.Measure To Alleviate Problems Of Abnormal Noise From The Copy Paper Feed Drive Unit. (WHITE) Technical Bulletin 3 63.8 KB
AR-5040 (serv.man13) 1.Changes Carried Out In The Finishing Unit As A Measure To Improve Productivity. 2.Correction Carried Out In The Parts Guide. (WHITE) Technical Bulletin 2 64.43 KB
AR-5040 (serv.man14) 1.Measure To Prevent The CL Lead Wire From Lifting Up. 2.Measure To Prevent Contact With The Home Position Sensor Detection Plate In The Scanner Unit. (WHITE) Technical Bulletin 2 46.6 KB
AR-5040 (serv.man15) Parts Addition - Scanner Unit. (WHITE) Technical Bulletin 1 39.8 KB
AR-5040 (serv.man16) 020-Sharp UK Technical Website (PREVIOUSLY SENT OUT AS FF COP 075) Technical Bulletin 1 14.75 KB
AR-5040 (serv.man18) 018-EPROM Upgrade Exchange Scheme (PREVIOUSLY SENT OUT AS FF COP 062) Technical Bulletin 1 10.34 KB
AR-5040 AR5040 Handy Guide Handy Guide 2 17.18 KB
AR-5040 (serv.man36) MSDS F-0451 Regulatory Data 2 278.4 KB
AR-5040 (serv.man37) MSDS F-3451 Regulatory Data 2 247.11 KB
AR-5040 (serv.man38) Environmental Data Sheet Regulatory Data 1 4.72 KB
AR-5040 (serv.man39) Packaging Weights Data Regulatory Data 1 5.42 KB

Random: