Read Sharp AR-5040 (serv.man34) Technical Bulletin online
(3) An ICB and capacitor has been added to the ICU PWB accommodate the special
photographic mode. The following parts codes of the ICU PWB have also been
changed in accordance with these changes.
Added parts
VCKYTVIEF104Z (capacitor)added location C105 . C106
VHI74F00SJ/-1 (IC)
VHI74F00SJ/-1 (IC)
added location IC70
VHI74F74SJ/-1 (IC)
added location IC71
From the start of 1994 December production.
(Temporary measures have been carried out since the start of mass production.).
(4) A ferrite core has been added to the CL lead wire as a measure to improve noise
(only for models of the 200 V series).
From the start of 1994 October production.
(5) There was a danger of the rear end of the copy paper getting caught on the upper
ST sheet in the staple unit of the 100 V series. To alleviate this problem, the ST sheet
has been changed to the one used in the 200 V series.
From the start of 1994 December production.
(6) There was a mistake in the parts code listed in the parts guide for the AC cord
holder. Correction of the error as described below is requested (only for machines
bound for SEEG, UK and Australia).
bound for SEEG, UK and Australia).
LFIX-0084FCZZ
→
LFIX-0016FCZZ.
(Mistaken) (Corrected)
Ferrite core
(RCORF0012FCZZ)
(RCORF0012FCZZ)
Section wound with tape
CL Lead wire
(DHAI-2344FCZZ)
(DHAI-2344FCZZ)
Sharp Electronics (UK) Ltd, Copier Technical Support, Technical Service Group
Model:AR5040
Bulletin number: AR5040-002
Page: 2 of 7
Click on the first or last page to see other AR-5040 (serv.man34) service manuals if exist.