AR-5040 (serv.man14). 1.Measure To Prevent The CL Lead Wire From Lifting Up. 2.Measure To Prevent Contact With The Home Position Sensor Detection Plate In The Scanner Unit. (WHITE) - Sharp Copying Equipment Technical Bulletin (repair manual)

ar-5040 (serv.man14) technical bulletin
Model
AR-5040 (serv.man14)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
46.6 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / 1.Measure To Prevent The CL Lead Wire From Lifting Up. 2.Measure To Prevent Contact With The Home Position Sensor Detection Plate In The Scanner Unit. (WHITE)
File
ar-5040-sm14.pdf
Date
Next: Sharp AR-5040 (serv.man15) Technical Bulletin

Read Sharp AR-5040 (serv.man14) Technical Bulletin online

1.
MEASURE TO PREVENT THE CL LEAD WIRE FROM LIFTING
UP.
2.
MEASURE TO PREVENT CONTACT WITH THE HOME
POSITION SENSOR DETECTION PLATE IN THE SCANNER
UNIT.
1. Measure to prevent the CL lead wire from lifting up.
1.Model Name:
AR5040
2.General:
A CL lead wire cover has been added as a measure to prevent the CL lead wire from
rising up.
3.Action:
From the start of 1997 April production.
2. Measure to prevent contact with the home position sensor detection plate
in the scanner unit.
1.Model Name:
AR5040
2.General:
The ground wire from the ORS illuminationPWB is fixed to the optical plate, but the fixing
screws were too long, creating the possibility of contact between the ground wire fixing
screw and the detection plate of the home position sensor occurring during scanner unit
operations. As a measure to alleviate this problem, sufficient space has been secured
by changing the fixing screws of the ground wire to shorter screws.
Sharp Electronics (UK) Ltd., Technical Services Group
Date:
9 July 1999
Model:
AR5040
Ref:
022
Colour: White
Page:
1 of 2
TECHNICAL BULLETIN
CL Lead wire cover
Tighten together with
the step screw
Insert into the screw hole
!
3.Action:
From the start of 1997 May production.
Ref.
No.
Model
name
Version
P/G No.
Current parts
New parts
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
Parts code
Parts code
Price
rank
1
AR5040
All
12
—
PCOVP1427FCZZ
AF
CL Lead wire cover
1st lot
'97/4
6
2
5
LX-BZ0618FCZZ
AA
Screw (M4
´
4)
1st lot
'97/5
<Interchange>
1. Interchangeable.
4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
5. Interchangeable if replaced with same types of
related parts in use.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
6. Others.
Parts marked with “
” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Sharp Electronics (UK)Ltd., Technical Services Group
Page of 2
Display

Download Sharp AR-5040 (serv.man14) Technical Bulletin

Here you can read online and download Sharp AR-5040 (serv.man14) Technical Bulletin in PDF. AR-5040 (serv.man14) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-5040 (serv.man14) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.

Found More:

AR-5040 (serv.man14) Service Manuals

Preview DownloadPagesSize
AR-5040 (serv.man28) 008-Change in the Roller Frame Unit in the Finisher Elevator Frame Unit. Technical Bulletin 2 27.46 KB
AR-5040 (serv.man20) 016-Modification for the Finisher Tray Bounce Problem (PREVIOUSLY SENT OUT AS FF COP 016) Technical Bulletin 3 150.83 KB
AR-5040 (serv.man21) 015-Change in Copier Transportation Method (PREVIOUSLY SENT OUT AS FF COP 012) Technical Bulletin 1 8.74 KB
AR-5040 (serv.man22) 014-Copier Hotline Telephone Number Change (PREVIOUSLY SENT OUT AS FF COP 002) Technical Bulletin 1 10.3 KB
AR-5040 (serv.man23) 013-Measure to Alleviate Problems of Upward and Downward Movement of the Finisher Tray. Technical Bulletin 2 49.38 KB
AR-5040 (serv.man24) 012-Change in Castors Carried Out as a Measure to Improve Productivity. Technical Bulletin 1 17.42 KB
AR-5040 (serv.man25) 011-Change in ROM Version of Model AR5040 Technical Bulletin 2 33.03 KB
AR-5040 (serv.man26) 010-Change in the Original Copy Detection Sheild of the Optical Unit Carried out as a Measure to Improve Productivity. Technical Bulletin 1 18.68 KB
AR-5040 (serv.man27) 009-1 Measure to Alleviate Problems of Diagonal Feeding from the Upper Paper Cassette. 2 Change in the Manual Paper Feeding Lever in the Manual Multi Paper Feeding Unit as a Measure to Improve Productivity. Technical Bulletin 2 27.35 KB
AR-5040 (serv.man2) Change to the paper feed roller material. Technical Bulletin 13 1.22 MB
AR-5040 (serv.man29) 007-The Addition of a Separator Pawl Spacer to the Drum Cleaner Unit. Technical Bulletin 2 31.54 KB
AR-5040 (serv.man30) 006-Changes and Additions to Parts. Technical Bulletin 1 15.02 KB
AR-5040 (serv.man31) 005-Regarding 500 Cassette Paper Feeding Unit use and the Period for Changing the Rollers. Technical Bulletin 3 79.69 KB
AR-5040 (serv.man32) 004-Changes and Additions of Parts. Technical Bulletin 1 18.16 KB
AR-5040 (serv.man33) 003-Changes and Additions of Parts. Technical Bulletin 3 51.11 KB
AR-5040 (serv.man34) 002-Changes and Additions of Parts. Technical Bulletin 7 146.06 KB
AR-5040 (serv.man35) 001-1 Standardizationof the Parts Codes for the IC in the ICU PWB. 2 Prevention of Noise in the Sheild Box. 3 Correction of the Parts Guide. 4 Discontinuance of the Sheild Mylar in the Sheild Box Unit to Improve Productivity. 5 Prevention of Unclean Copies Due to the Curling of the Rear End of the Copy Paper During Double Side Copy Operations. 6 Improvement of Pusher Operations in the Finisher Unit. Technical Bulletin 5 377.95 KB
AR-5040 (serv.man18) 018-EPROM Upgrade Exchange Scheme (PREVIOUSLY SENT OUT AS FF COP 062) Technical Bulletin 1 10.34 KB
AR-5040 (serv.man3) Change of parts (variable resistor) Technical Bulletin 1 6.96 KB
AR-5040 (serv.man4) Establishment of the CG reverse roller shaft UN and the Reverse roller shaft UN in the 550 paper feeding unit as service parts Technical Bulletin 2 52.22 KB
AR-5040 (serv.man5) Supply of paper feeding roller rubbers as separate service packages. (WHITE) Technical Bulletin 1 74.93 KB
AR-5040 (serv.man6) Change In The Magnetic Clutch Of Paper Feeding Unit In The 500 Tray To Improve Productivity. (WHITE) Technical Bulletin 2 103.1 KB
AR-5040 (serv.man7) 1.Change In The Material Used For The Attachment Plate Of The guide Switch In The Transport Unit Carried Out As A Measure To Improve Productivity. 2.Change In The Material Of The Lower Guide Of The 500 Tray Paper Feeding Unit Carried Out As A Measure To Improve Productivity. 3.Change In The Shape Of The ADU Of The Roller Arm Carried Out As A Measure To Improve Productivity. (WHITE) Technical Bulletin 3 79.15 KB
AR-5040 (serv.man8) 1.Change In The Screws In The Optical Unit Carried Out As A Measure To Improve Productivity. 2.Measure To Alleviate Problems Of Oil Oozing From The Bushing In The Developing Unit. 3.Addition Carried Out Of An ICU Cover Sheet. 4.Measure To Improve Operation Stability Of The Shutter In The Toner Box. 5.Change Carried Out In The Maker Carried Out As A Measure To Improve Productivity. (WHITE) Technical Bulletin 3 93.37 KB
AR-5040 (serv.man9) Parts Interchangeability - 500 Sheet Tray Feed Unit. (WHITE) Technical Bulletin 4 108.66 KB
AR-5040 (serv.man10) 1.Change Carried Out In The Parts Used In The Tray Drawer Unit. 2.Change Carried Out In The Parts Used In The Tray Assembly Drawer Unit. 3.Change Carried Out In THe Parts Used In The ADU Unit. (WHITE) Technical Bulletin 4 108.99 KB
AR-5040 (serv.man11) 1.Measure To Stabilise The Return Of The PPD1 Actuator. 2.Measure To Alleviate Problems Of Diagonal Feeding Of The Original Documents In The ADF. 3.Change In The Attachment Screws Of The Fan Attachment Base Plate Carried Out As A Measure To Improve Operation. 4.Change In The Part Code Carried Out In Accordance With A Change In The Maker (Action Carried Out As A Measure To Improve Productivity). (WHITE) Technical Bulletin 3 62.17 KB
AR-5040 (serv.man12) 1.Change Carried Out In The Printed Content Of The MSDS Card. 2.Measure To Prevent Chafing Of The Copy Paper. 3.Measure To Alleviate Problems Of Abnormal Noise From The Copy Paper Feed Drive Unit. (WHITE) Technical Bulletin 3 63.8 KB
AR-5040 (serv.man13) 1.Changes Carried Out In The Finishing Unit As A Measure To Improve Productivity. 2.Correction Carried Out In The Parts Guide. (WHITE) Technical Bulletin 2 64.43 KB
AR-5040 (serv.man15) Parts Addition - Scanner Unit. (WHITE) Technical Bulletin 1 39.8 KB
AR-5040 (serv.man16) 020-Sharp UK Technical Website (PREVIOUSLY SENT OUT AS FF COP 075) Technical Bulletin 1 14.75 KB
AR-5040 (serv.man17) 019-New Systems Support Team Systems Support Hotline (PREVIOUSLY SENT OUT AS FF COP 064) Technical Bulletin 1 9.96 KB
AR-5040 (serv.man19) 017-To Prevent Damage to the CCD Harness (PREVIOUSLY SENT OUT AS FF COP 022) Technical Bulletin 2 48.72 KB
AR-5040 AR5040 Handy Guide Handy Guide 2 17.18 KB
AR-5040 (serv.man36) MSDS F-0451 Regulatory Data 2 278.4 KB
AR-5040 (serv.man37) MSDS F-3451 Regulatory Data 2 247.11 KB
AR-5040 (serv.man38) Environmental Data Sheet Regulatory Data 1 4.72 KB
AR-5040 (serv.man39) Packaging Weights Data Regulatory Data 1 5.42 KB

Random: