Read Sharp AR-280 (serv.man35) User Guide / Operation Manual online
7-3
CHAPTER
7
FINISHER (AR-FN1)
The copier has two different finisher modes: one sorts copies into
sets matching the sequence of the originals and the second groups
copies by original. When the optional finisher (AR-FN1) is installed,
the copier can automatically staple the sorted copies. Each collated
set of copies or group of copies can be stacked offset from the
previous set.
sets matching the sequence of the originals and the second groups
copies by original. When the optional finisher (AR-FN1) is installed,
the copier can automatically staple the sorted copies. Each collated
set of copies or group of copies can be stacked offset from the
previous set.
PART NAMES
OPTIONAL EQUIPMENT
Finisher (AR-FN1)
Finisher release lever
Top tray
Second tray
(not used in the copy mode)
(not used in the copy mode)
Stapler unit
Paper transport area cover
Paper feed area cover
Top cover
Offset tray
When copying onto size A3 (11” x 17”)
paper, lower the metal support located at
the tip of the offset tray.
paper, lower the metal support located at
the tip of the offset tray.
●
The top tray and second tray are each furnished with an extendable component, which is to be used when copying
onto size A3 (11” x 17”) paper.
onto size A3 (11” x 17”) paper.
Click on the first or last page to see other AR-280 (serv.man35) service manuals if exist.