AR-280 (serv.man35). AR280 285 335 Operation Manual-Section 2 - Sharp Copying Equipment User Guide / Operation Manual

ar-280 (serv.man35) user guide / operation manual
Model
AR-280 (serv.man35)
Pages
58
Size
1.49 MB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Copying Equipment / AR280 285 335 Operation Manual-Section 2
File
ar-280-sm35.pdf
Date

Read Sharp AR-280 (serv.man35) User Guide / Operation Manual online

4-1
CHAPTER
4
                                    
  
Page
PAPER
..................................................
4-2
Types and sizes of copy paper
.................................
4-2
Loading copy paper
.........................................
4-2
ADDING TONER
...........................................
4-5
USED TONER DISPOSAL
....................................
4-7
STORAGE OF SUPPLIES
....................................
4-8
CHAPTER 4
SUPPLIES
This chapter describes the supplies for this copier
such as paper and toner.
4-2
CHAPTER
4
PAPER
 Types and sizes of copy paper
Size
Weight
Capacity
Special paper
(80 
g
/m
2
 (21lb.)
paper)
Paper trays
A5 to A3
56 to 105 
g
/m
2
500 sheets
1 and 2
(5-1/2" x 8-1/2"
(15 lbs. to 28 lbs.)
to 11" x 17")
Bypass tray
 A6 to A3
52 to 128 
g
/m
2
50 sheets
Transparency film, labels,
(5-1/2" x 8-1/2"
(14 lbs. to 34 lbs.)*
tracing paper, cover stock**
to 11" x 17")
(Ordinary paper)
(200 
g
/m
2
 
(110 lbs.)), index
stock** (176 
g
/m
2
 
(65 lbs.))
For best results, use only paper recommended by SHARP.
* For paper weighing from 105 to 128 
g
/m
2
 (28 to 34 lbs.), A4 (8-1/2"
x 11") is the maximum size that can be fed through the bypass tray.
** Paper heavier than 128 
g
/m
2
 (34 lbs.) must be fed narrow side into the
feed slot of the bypass tray.
Loading copy paper
OPEN TRAY   
 
 
 
 
AND ADD PAPER.
” will be displayed when there is
no copy paper in a selected paper feed station.
When a selected paper tray is not installed or is improperly installed,
PUSH PAPER TRAY   INTO THE MACHINE UNTIL IT
LATCHES.
” will be displayed. Install it or push it back firmly into
place.
For best results, use only Sharp recommended paper.
SUPPLIES
  Paper
4-3
CHAPTER
4
SUPPLIES
  Paper
Loading paper in paper trays 1 and 2
1
Gently lift and pull out the paper tray.
2
Only use paper within the Sharp specification and
follow the paper manufacturer’s instructions regarding
fanning and loading the paper.
The tray holds 500 sheets of paper.
Do not load paper above the maximum height line.
3
Push the paper tray firmly back into the copier.
PAPER
Maximum height line
4-4
CHAPTER
4
PAPER
Changing the copy paper size in the tray
1
Gently lift and pull out the paper tray until it stops.
2
Adjust the paper size indicator to match the paper size
to be set.
Slide the paper size indicator to the right or left to match the
paper size.
3
Adjust the front guide and left guide while squeezing
their lock levers.
Slide the front and left guides to match the width and length of
the copy paper.
4
Load copy paper into the tray.
5
Place the paper size card in the front of the paper tray.
The paper size card has three faces. Fold the card properly to
show the selected paper size. The paper size indication which
shows through the slot on the front of the copier should match
the selected paper size.
6
Push the paper tray firmly back into the copier.
SUPPLIES
  Paper
Paper size indicator
Front guide
Left guide
Maximum height line
Paper size 
card
8  
x11
216x279
216x330
8  
x13
B5
A4
A3
A5
B5
B4
Page of 58
Display

Download Sharp AR-280 (serv.man35) User Guide / Operation Manual

Here you can read online and download Sharp AR-280 (serv.man35) User Guide / Operation Manual in PDF. AR-280 (serv.man35) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp AR-280 (serv.man35) Copying Equipment. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.