AR-280 (serv.man35). AR280 285 335 Operation Manual-Section 2 - Sharp Copying Equipment User Guide / Operation Manual. Page 38

Read Sharp AR-280 (serv.man35) User Guide / Operation Manual online

7-6
CHAPTER
7
Staple sort
The STAPLE SORT mode staples A4, A4R, B4, and A3 (8-1/2" x
11", 8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17") size copies. Stapled
sets cannot be delivered to the top tray.
In some regions, 216 mm x 330 mm (8-1/2" x 13") size paper can
be used in place of B4 (8-1/2" x 14").
NOTE:
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. The paper size selected
for the first scanned original will be used for all originals. To copy
different size originals in the STAPLE SORT mode, select the paper
size for the largest original.
Using the SPF/RADF
1
Set the originals in the document feeder tray.
If the number of copies in one set is more than 50 for
A4 or A4R (8-1/2" x 11" or 8-1/2" x 11"R) paper or 25 for B4 or
A3 (8-1/2" x 14" or 11" x 17") paper, the copies will not be
stapled.
The stapling positions shown in the left figures are the factory
default positions for the AR-280 and AR-285/AR-335.
2
Press the OUTPUT key.
3
Press the “STAPLE SORT” key on the touch panel.
Stapling position
OPTIONAL EQUIPMENT
Finisher (AR-FN1)
FINISHER (AR-FN1)
AUTO
EXPOSURE
Stapling position
AR-280
AR-285/AR-335
READY TO COPY.(DOCUMENT FEEDER MODE) 
OUTPUT
TOP TRAY
OFFSET
SORT
OFFSET
TRAY
STAPLE
SORT
GROUP
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
Page of 58
Display

Click on the first or last page to see other AR-280 (serv.man35) service manuals if exist.