AR-200 (serv.man5). AR200 Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 16

<Only when the FAX is
installed>

Main
code

Sub

code

Contents

Details of operation

Initial
value

Set range

43

1

Fusing temperature setting

Used to display the current setting of the fusing temperature at right.
After selecting the fusing temperature with the magnification ratio display
key, press the start key, and the set value is stored. The set range is 155

∼

 190˚C. Use the magnification ratio key to adjust the value by –5˚C.

180

155 

∼

 190

Key operation

Fusing temperature select: Magnification ratio display key

46

1

Copy density level
adjustment

After completion of warmup, shading is performed and the currently set
copy density level is displayed. For the adjustment procedure, refer to
the previous descriptions.

1 

∼

 99

Key operation

Display

Mode select: Exposure mode
select key
Copy density level: Numeric
keys

<LED lighting at each mode selection>
Auto mode: AUTO LED

Manual mode: MANUAL LED
Photo mode: PHOTO LED

Toner save mode: MANUAL +
PHOTO LED
AETS mode: AUTO + PHOTO LED

2

FAX density level
adjustment

After completion of warmup, shading is performed and the currently set
FAX density level is displayed. For the adjustment procedure, refer to the
previous descriptions.

1 

∼

 99

Key operation

Display

Mode select: 
Exposure mode select
key
Fax density level:
Numeric key

<LED lighting at each mode selection>

Standard mode: Standard LED

Fine mode: 
 FINE 

LED

Super fine mode: SUPER FINE LED

Ultra fine mode: Ultra fine LED

Half tone mode: HALF TONE LED

48

1

Main scanning (front/rear)
direction magnification
ratio adjustment
(Copy/FAX/OC-SPF
common)

After completion of warmup, shading is performed and the currently set
main scanning (front/rear) direction magnification ratio adjustment and
the OC mode document center off adjustment are performed. For the
adjustment procedure, refer to the previous descriptions.

1 

∼

 99

Key operation

Display

Adjustment mode select:
Magnification ratio display
key

Auto magnification ratio adjustment:
 AUTO 

LED

Manual main scanning
direction magnification
ratio adjustment
Set value: Numeric keys

Manual magnification ratio adjustment:
 MANUAL 

LED

OC mode document center off
adjustment:
 PHOTO 

LED

2

OC mode sub scanning
direction magnification
ratio adjustment in copying

After completion of warmup, shading is performed and the currently set
OC mode sub scanning direction magnification ratio adjustment in copy-
ing is performed. For the adjustment procedure, refer to the previous
descriptions.

1 

∼

 99

Key operation

OC mode sub scanning direction magnification ratio in copying:
Numeric keys

∗

1: Each counter display method

To display 123456: 123 (0.75 sec) 

→

 Blank (0.35sec) 

→

 456 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 repetition

∗

2: Display after clearing each counter 

000 (0.75 sec) 

→

 Blank (0.35sec) 

→

 000 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 Repetition

AR-200

5 – 9