Read Sharp AR-200 (serv.man5) Service Manual online
Main
code
code
Sub
code
Contents
Details of operation
Initial
value
value
Set range
22
16
Duplex print counter
display
display
Used to display the current duplex print counter value.
∗
1
17
Copy counter display
Used to display the current copy counter value.
∗
1
18
Printer counter display
Used to display the current printer counter value.
∗
1
19
Electronic sort counter
display
display
Used to display the current electronic sort counter value.
∗
1
20
FAX print counter display
Used to display the current FAX print counter value.
∗
1
21
Scanner counter display
Used to display the current scanner counter value.
24
1
JAM memory, JAM
counter clear
counter clear
Used to clear the JAM memory and the JAM counter.
∗
2
2
Trouble memory clear
Used to clear the trouble memory.
∗
2
4
SPF counter clear
Used to clear the SPF counter.
∗
2
5
Duplex counter clear
Used to clear the duplex counter.
∗
2
6
Paper feed counter clear
Used to clear the paper feed counter.
∗
2
7
Drum counter clear
Used to clear the drum counter.
∗
2
8
Copy counter clear
Used to clear the copy counter.
∗
2
9
Printer counter clear
Used to clear the printer counter.
∗
2
10
Electronic sort counter
clear
clear
Used to clear the electronic sort counter.
∗
2
11
FAX print counter clear
Used to clear the FAX print counter.
∗
2
13
Scanner counter clear
Used to clear the scanner counter.
∗
2
25
1
Main motor operation
check
check
Execute the simulation with the developer cartridge removed, and the
main motor will rotate for 30 sec. At that time, the cooling motor rotates
at a low speed.
main motor will rotate for 30 sec. At that time, the cooling motor rotates
at a low speed.
10
Polygon motor operation
check
check
Used to drive the polygon motor for 30 sec.
26
1
Option switch display
Used to display the installed option on the operation panel. (The LED
corresponding to the installed option is lighted.)
corresponding to the installed option is lighted.)
Key operation
Display
Display select:
Magnification
Magnification
ratio
display key
<Lighting with an option installed>
When “A” is displayed:
Shifter: Paper empty LED
Job separator: JAM LED
SPF: SPF select LED
RSPF: SPF JAM LED
When “A” is displayed:
Shifter: Paper empty LED
Job separator: JAM LED
SPF: SPF select LED
RSPF: SPF JAM LED
Duplex mode: Main cassette select LED
Simplex mode: Multi manual paper feed select LED
When “b” is displayed:
Cassette (2nd step): No. 2 cassette select LED
Cassette (3rd step): No. 3 cassette select LED
Cassette (4th step): No. 4 cassette select LED
Memory installed: Paper empty LED
FAX: JAM LED
Printer: Main body JAM LED
ERDH: Main cassette select LED
16CPM: SPF JAM LED
20CPM: SPF select LED
Document sensor: Auto paper select LED
3
Auditor setting
Used to display the current auditor setting with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.
After entering the set value, press the start key, and the set value is
stored.
0
0
∼
2
Key operation/Display
0: Built-in auditor
1: Coin vendor
2: Others
∗
1: Each counter display method
To display 123456: 123 (0.75 sec)
→
Blank (0.35sec)
→
456 (0.75 sec)
→
Blank (1.0 sec)
→
repetition
∗
2: Display after clearing each counter
000 (0.75 sec)
→
Blank (0.35sec)
→
000 (0.75 sec)
→
Blank (1.0 sec)
→
Repetition
AR-200
5 – 6
Click on the first or last page to see other AR-200 (serv.man5) service manuals if exist.