AR-200 (serv.man5). AR200 Service Manual - Sharp Copying Equipment Service Manual (repair manual). Page 12

<Japan only>

Main
code

Sub

code

Contents

Details of operation

Initial
value

Set range

20

1

Maintenance counter clear

Used to clear the maintenance counter. 

∗

2

21

1

Maintenance cycle setting

Used to display the currently set maintenance cycle at the numbers
shown at right. When the set value is entered and the start key is
pressed, the set value is stored.

4

0 

∼

 5

Key operation/Display

0: 2500 sheets

3: 30000 sheets

1: 5000 sheets

4: 150000 sheets

2: 15000 sheets

5: FREE (999999 sheets)

2

Mini maintenance cycle
setting

Used to display the currently set mini maintenance cycle at the numbers
shown at right. When the set value is entered and the start key is
pressed, the set value is stored.

1

0 

∼

 3

Key operation/Display

0: 2500 sheets

1: 5000 sheets

2: 10000 sheets

3: FREE (999999 sheets)

22

1

Maintenance counter
display

Used to display the current maintenance counter value. 

∗

1

2

Maintenance preset value
display

Used to display the current maintenance preset value (set with SIM
21-1). 

∗

1

3

JAM memory display

Used to display a JAM generated during copying on the JAM position
display on the operation panel. Max. 30 recent jams are stored.
JAM No. 1 is displayed even when there is no JAM.

Key operation

Display

JAM history select: 
  Magnification 

ratio

display key

The history number (1 

∼

 30) is displayed

on the display.
The JAM position LED corresponding to
the history number is lighted.

4

Total JAM counter display

Used to display the current total JAM counter value. 

∗

1

5

Total counter display

Used to display the current total counter value. 

∗

1

6

Developing counter display

Used to display the current developing unit counter value. 

∗

1

7

Developing preset counter
value display
<Japan only>

Used to display the current mini maintenance preset value (set with SIM
21-2). 

∗

1

8

SPF counter display

Used to display the current SPF counter value. 

∗

1

9

Paper feed counter display

Used to display the current paper feed counter value for each paper feed
port. 

∗

1

Key operation

Paper feed port selection: Tray select key

12

Drum counter display

Used to display the current drum counter value. 

∗

1

14

Copier ROM version
display

Used to display the version number of the main ROM.

15

Trouble memory display

Used to display the actually occurred trouble codes on the display on the
operation panel. When the start key is pressed during the main code
display, the sub code is displayed. Max. 20 recent trouble codes are
stored.

Key operation

Display

Sub code display: Start key

Hysteresis 1 

∼

 10: The upper digit of 

  display 

“A” 

∼

 “J” lights up.

Hysteresis 11 

∼

 20: The upper digit of 

  display 

“A” 

∼

 “J” blinks.

Trouble code history
select: Magnification ratio
display key

•

Display without trouble code
Main code: “----”
Sub code: “00”

∗

1: Each counter display method

To display 123456: 123 (0.75 sec) 

→

 Blank (0.35sec) 

→

 456 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 repetition

∗

2: Display after clearing each counter 

000 (0.75 sec) 

→

 Blank (0.35sec) 

→

 000 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 Repetition

AR-200

5 – 5